PC won't turn on after pressing power button

[jason5191]

nothing happened after I pressed the power button

the LED on motherboard is on

i have even try to power on using the EZ touch power button on motherboard and it didn't work too

so anyone here can help me with this problem ?

[Cerberus42]

in your case

MAKE SURE that your motehrboard does NOT touch teh case ANYWHERE but those gold screws you pt into the case those rare specialially designed to not ground the motehrbaord, they are simple stanoffs, your motherboard will not boot if it is touching the case anywhere else

[jason5191]

errm.....this is not the first time i start the pc so i dun think that's the problem.....and i already make sure my mobo doesnt touch the case but it still doesnt solve my problem

[smolt]

reset your Bios

[jason5191]

i have reset my bios too it still doesnt work

[smolt]

http://discussions.hardwarecentral.com/arc...p/t-155054.html

 

15a single rail kinda pushing your luck

 

http://www.chieftec.com/products/psu/DPSII%20PSU.htm

[jason5191]

not the psu problem i have tried other better psu but that didnt solve the problem

[smolt]

Is that a new board?

 

Make sure the bios reset jumper is in the right place

 

try reseating your AGP

 

if that dont work

pull it out of the case and just hook up

 

DFI LanPartyUT nF3 250Gb

AMD Athlon 64 754 2800+

1 x 512 Kingmax

Ati Radeon 9550

WD 80gb

LITEON CDRW

Chieftec 420W

do not hook up front case botton controls

and see if it boots then

[Cerberus42]

try your bios reseting again

 

alot of times you need to do it for a few minutes

[jason5191]

no that's not new board i've been using it for 1 year plus

i have tried reseting bios(for many times), reseating AGP, change another psu,take out the board from the case but i still cant power up

[learners permit]

I believe the US warranty is 2 or 3 yrs. Contact AG about warranty info.