Help with Opteron 144

[bohemy]

Hi,

I tried OC Opteron 144 and I could get on 2633 MHz(292MHzx9)/1,504V.It seems to be stable,I can work with computer,pass the SuperPI tests,finish 3Dmark05 but I can't pass Prime95 it stop within a hour with a error.BTW it worked once 4 1/2 hours without problem a stopped the program and tried to increase FSB but I couldnt boot into Windows even +1MHz above 292.So I went back to 292MHz and everything working fine accept the Prime95 test.

THX in advance for any ideas and suggestions.

 

FSB 292MHz x9

LDT......... x3

DRAM divider 166/6:5

CPU VID..........AUTO

CPU VID spec.control....above VID*110%

LDT voltage....1,20V

CHIPSET volt...1,50V

DRAM volt........2,6V

memory timing

CL........3T

tRCD....3T

tRP......3T

tRAS....7T

tRC......7T

tRFC....16T

CR.......1T

tRRD....2T

tWR.....2T

tRTW...3T

tWTR...2T

tWCL...1T

tREF.....200MHz...15,6us

 

DQS skew control......Increase

[red930]

...Set a distinct value for CPU vid so you know what voltage you're using.

 

And get a sig together before posting again.