SJF Posted May 9, 2006 Posted May 9, 2006 Ok think I have my memory settings set correctly. Ran bootable metest86 for 9hrs and no errors. Here are my settings. DRAM - 200 CPC - Enabled TCL - 2 TRCD - 2 TRAS - 5 TRP - 2 TRC - 7 TRFC - 9 TRRD - 00 TWR - 2 TWTR - 1 TRWT - 1 TREF - 3120 TWCL - 1 DRAM BANK INTERLEAVE - Enabled DQS SKEW CONTROL - Increase DQS SKEW VALUE - 250 DRAM DRIVE STRENGTH - 8 DRAM DATA DRIVE STRENGTH - 3 MAX ASYNC LATENCY - 5.0 Nan Secs DRAM RESPONSE TIME - Normal READ PREAMBLE TIME - 4 Nan Secs IDLE CYCLE LIMIT - 16 cycles DYNAMIC COUNTER - Enable R/W QUE BYPASS - 16x BYPASS MAX - 7X 32 BIT GRAN - Disable Any suggestions for improvement or stick with what I have? My mem type is in my sig. Quote Share this post Link to post Share on other sites More sharing options...
Alienwhere Posted May 9, 2006 Posted May 9, 2006 Max asa lat 7ns Read prem 5 try that.. Quote Share this post Link to post Share on other sites More sharing options...
SJF Posted May 9, 2006 Posted May 9, 2006 Thanks for the input. Tried it and no problems. I know I should leave most everything to auto since not OC but is fun to learn. Quote Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted May 9, 2006 Posted May 9, 2006 Try this combo - you have good low latency memory. Works for me when I have good tight timings. MAX ASYNC LATENCY - Auto DRAM RESPONSE TIME - Fast READ PREAMBLE TIME - Auto You could try TREF - 3072 Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.