Jump to content
Sign in to follow this  
Shadow of chaos

What ram? 2GB kit.. not GSKILL.

Recommended Posts

i just got my first BSOD with my memory, and their not running stable.. they are too picky for me so im thinking about selling them and getting something that's 100% compatible with these boards.

 

Advice?..

Share this post


Link to post
Share on other sites

I was playing cs source and my game locked up, i was only playing around 40 mins.. at the same time the sound went nuts and started crackling, is that normal for ram thats unstable??

 

also i dont know if i can order from that site because i may end up paying import tax, i might get the OCZ from a uk site though.. has anyone had problems with them?

Share this post


Link to post
Share on other sites

Check out the Mushkin Redlines pc4000 EB, they use Infineon CE-6 chips. On a 1:1, you will probably get ~260 RAM FSB stable, however, put them on a divider and <225 FSB, you can get 2.0, 2,3,5 timings ! They are about the tightest 2x1024 out there.

Share this post


Link to post
Share on other sites

If your having problems with HZs your gonna have problems with anything you get . A todle waste of money. But its your money and PC just giving my 2 cents

Share this post


Link to post
Share on other sites

Well i have no idea why im getting problems, only the ram is at 250mhz. Nothing is overclocked.

 

i guess i can try more settings, but i hate having to fiddle around so much with these.

 

I had run memtest for so many hours, i think it was 11.. standard test, and no errors had came up but my computer aint right because things are crashing and i had a blue screen once already.

 

Whatever it is its not running right, be it a problem with something IN my computer, the settings.. or what i dont know.

 

i wish there was just memory you could actually put in your pc and and it gets automatically configured to work at the speed its set at, 200-250 or whatever.. and if that doesnt work then you know for certain they are defective, instead of having to try billions of damn settings constantly :(

Share this post


Link to post
Share on other sites

I already had them written down, forgot.

 

Here are the ones i am using now.

 

Voltage tried 2.6 - 2.7

 

Cas 3.0

TRC 15

TRFC 17

TRCD 4

TRRD 2

Tras 8

Trp 3

Twr 2

Twtr 2

Trtw 3

 

Skew auto, skew value 0. - off

Drive strength 4

DD strength 3

Read write bypass 16x

C mode 128 bit

Disable ecc

disable 2t

bypass max 7x

max async 8ns

read preamable 5

Idle cycle limit 256

Dynamic counter enable

disable granularity.

Share this post


Link to post
Share on other sites

If this doesn't get you anywhere you have bum sticks. Voltage at 2.6

 

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Response - Normal

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 08 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...