Sound Problem

[metalslug]

I had no real clue where to placxe this so feel free to move it. I cant get my sound to work on my new rig. Not even the built in sound in puts work when I plug the speakers in. I also get this problem error when I try and open up winamp(look below for error). Also, my LAN port seems to work as my mopdem when connected to it lights up and so does the port, but the only way I can get on, is via a usb connection(get on to my dsl connection that is.). What can be wrong? Thanks for your time, and any help will do.

 

Sound error: wave ouput v2.1(d)error

Error code 2

windows error message

"A device ID has been used that is out of range for your system"

 

DFI LP UT nF4 SLI-D Socket 939 NVIDIA nForce4 SLI ATX AMD Motherboard Seagate U Series X 20 ST320014A 20GB 5400 RPM IDE Ultra ATA100 Hard Drive Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM Serial ATA150 Hard Drive SABRENT SND-P8CH 7.1 Channels PCI Interface Sound Card

AMD Athlon 64 X2 3800+ Manchester 2000MHz HT Socket 939 Dual Core Processor Model ADA3800BVBOX

ASUS 16X DVD±R DVD Burner With 5X DVD-RAM Write Black E-IDE/ATAPI Model DRW1608P2S

COOLER MASTER Ammo 533 RC-533-SWN1 Black/Silver Aluminum+Plastic front bezel; SECC chassis ATX Mid Tower Computer Case

mushkin 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered Dual Channel Kit System Memory Model 991357

Rosewill 450w PSU

[red930]

Okay what have you done as far as drivers? Did you install the latest Chipset drivers from the nVIDIA website, 6.70? If you look into your manual booklet it will show you exactly where you install that on-board sound module on your motherboard. Plus you'll need the drivers, not sure if you're using older drivers or not, but try going to the manufactors website to download the latest (newest) drivers as well and see if that works.

 

 

Note: Don't install any drivers from the CD-ROM Driver that came with your motherboard. Reason: Outdated and buggy.....newer released drivers can be downloaded from their specific websites.