Evercool VC-RE Chipset Fan Installation Tutorial Video! (2 fast mirror

[Morca007]

(Emotion)_Games - Thanks very much for the tut, I'll be installing my fan tomorrow, and from watching this, it looks like it'll be a cinch!

[Guest Halvis]

 

 

this is what NOT to do, and why sometimes you should just avoid AS5 haha (if that had been Ceramique, the cpu would be dead...it would just be coated in a lot of white thermal paste lol)

 

"Ceramique, the cpu would('NT) be dead" I think you meant?

[JonnyRial]

Cool thanks for the tutorial and informative thread I would like to get rid of that noisy Chipset fan.

[General Septem]

I'll probably end up doing this, but what does everyone mean about the cooler being noisy? I can barely hear it unless it's fully on.

[Morca007]

I'll probably end up doing this, but what does everyone mean about the cooler being noisy? I can barely hear it unless it's fully on.

Then you are one of the lucky ones.

The noise can either come from a defective/broken fan, one thats having to run full blast all the time, or from interference.

[Morca007]

Well, I just finished installing my Evercool! I have to say, it looked easier than it was, Just like when you watch Messier zoom up the ice, and (seemingly) effortlessly slip a goal in right behind the goalie.

 

My biggest stumbling block was when I removed the stock cooler, A large peice of dried paste was stuc fast to the chip. I was able to remedy this by heating it with a hair-dryer, and then quickly scrubbing it off.

 

I'm enjoying the noise (or lack thereof) from my mobo, thanks (Emotion)_Games!

[fps_shawn]

I just installed it too, 30mins max, most because i was nervous and taking the mobo in and out of the case was hard with everything in. all in all. GREAT!

[iamkoza]

Well, I just finished installing my Evercool! I have to say, it looked easier than it was, Just like when you watch Messier zoom up the ice, and (seemingly) effortlessly slip a goal in right behind the goalie.

 

My biggest stumbling block was when I removed the stock cooler, A large peice of dried paste was stuc fast to the chip. I was able to remedy this by heating it with a hair-dryer, and then quickly scrubbing it off.

 

I'm enjoying the noise (or lack thereof) from my mobo, thanks (Emotion)_Games!

 

shouldhave searched this thread for help on the stuck pad to chipset, happy mentions that using a credit card to remove that is perfectly ok, and i too had a hard time geting it off with my trusty thermal paste remover, but the crdit card was easy to do and worked perfectly

[Rastra99]

i just installed this fan..takes like 15 mintues. it works great thanks

[Angry_Games]

i just installed this fan..takes like 15 mintues. it works great thanks

glad to hear!

 

(now make a sig before lowboy the DFI-Street SS Sig Nazi finds you!)

[KimberKlr]

lol

 

nice angry...... rub,rub,rub blot,blot,blot

 

just what kind of video are you making here. lol

 

kinda freaked me out,first time i ever heard your voice and wasn't expecting that deep sexy voice.

 

anyway just got sick of watching my chipset temp's run higher than my cpu so i thought i'd come over and see what coolers you guys are running.thats when i found your vid.

 

thanks again for the heads up,i gota go to newegg now.

[General Septem]

lol

 

nice angry...... rub,rub,rub blot,blot,blot

 

just what kind of video are you making here. lol

 

kinda freaked me out,first time i ever heard your voice and wasn't expecting that deep sexy voice.

 

anyway just got sick of watching my chipset temp's run higher than my cpu so i thought i'd come over and see what coolers you guys are running.thats when i found your vid.

 

thanks again for the heads up,i gota go to newegg now.

 

I'd reccomend getting it from here actually http://store.yahoo.com/cgi-bin/clink?svcom...aFb+vc-re.html+

 

The link supports DFI street and I'm not sure what Newegg's charging, but check it out.