Jump to content
Sign in to follow this  
Grzyb

DF1 Lanparty NF4 SLI-DR SATA QUESTION

Recommended Posts

Hi Guys, Hope someone can assist.

 

ATM my setup that I have created works fine, SATA 1/2/3/4/5/6/7 are recognised at Boot-Up...

 

The problem is that when Windows loads, only the SATA Drives connected to SATA 1/2/3/4 are showing up, the other 3 are not.

 

I have checked that the other 3 Drives work by connecting them to SATA 1/2/3 and all work OK....Management Console Doesn't show anything as well, Even Partition Magic v 8.05 draws a Blank.....

 

I don't want any RAID setup etc, as I don't use it...All I want is for the drives to be single drives recognised by Windows....

 

Is there a BIOS setting that I need to change, Or can SATA 5/6/7/8 on the MOBO only be used as part of a RAID system & not as individaul Drives?? I have data on all the drives mentioned.....

 

TIA for any info....

 

Grzyb

Share this post


Link to post
Share on other sites

OK Guys, Figured Out The Problem Myself....In The Genie BIOS, The Sil 3114 was configured for Operation as a RAID setup. Once I'd selected Only SATA in the Pull Down Box, all my Drives are now Visible....Machine now working as it should be...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...