kai_ Posted March 18, 2006 Posted March 18, 2006 Ok, here is the link to the previous thread, closed before I got a chance to update: http://www.dfi-street.com/forum/showthread.php?t=47047 Anyway, I have now got hold of a second DFI NF4 Ultra D board and this one isn't working either. In this new test setup, I am using the absolute minimum to try get a display on the secondary PCI-E slot. You cannot be telling me that my Seasonic the reason why the secondary pci slot isn't working when everything else works fine. Anyway the specs are: Ultra D board, 1GB stick of ram Bios 623-1 AMD Athlon64 3000+ Powercolor Radeon X300 Power supplies tested: Seasonic S12 430 Rev. A1, Enermax 470W Noisetaker, Shuttle 250W SilentX (just to show it works) With all power supplies, the same thing happens: I can only get a display when all the (SLI) jumpers are in position 1-2 and the graphics card is in the upper (PCI-E 1) slot. Any ideas? Share this post Link to post Share on other sites More sharing options...
red930 Posted March 18, 2006 Posted March 18, 2006 Just like the earlier thread is getting closed until you can read and understand the stickies. Share this post Link to post Share on other sites More sharing options...
Recommended Posts