tyr4el Posted March 17, 2006 Posted March 17, 2006 Hi, A friend just got his TWINX2048-3200C2 rev 1.2 Corsair sticks but we are having some problems in booting... His system specs: San Diego 3700+ no oc yet / Zalman 9500 DFI NF4-Ultra Rev A.00 Bios 310 (i think that this is the one that comes with this rev, we havent flashed yet) ATI x1900xt 2x1 GB TWINX2048-3200C2 rev 1.2 Hitachi 164 GB Sata II What bios should be the best one for this sticks?? This sticks have CH6 chips. This settings i found them in a corsair forum, but there only some bios settings (the rest it says to leave it default :confused: )... Motherboard make and model: Asus P4C800/-E and/or DFI INFINITY I865/I875 and/or Asus A7N8X and/or ABIT IC7 Max3.Each pair is tested and packaged together using the following settings: DRAM Clock: 200 MHz DRAM Voltage: 2.7X Volts SDRAM CAS Latency: 2T (2.5 on AMD platform) SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T SDRAM Bank Interleave: 4 Bank All other settings are motherboard defaults. And the other thing that we couldn't get, was that the HD need some special installation, i found a bootable cd that comes with the supossed drivers, but should i install it before windows installation or during the installation? Thanks for your help. Share this post Link to post Share on other sites More sharing options...
red930 Posted March 17, 2006 Posted March 17, 2006 Ye ole search... http://www.dfi-street.com/forum/showthread.php?t=24719 http://www.dfi-street.com/forum/showthread.php?t=25447 Share this post Link to post Share on other sites More sharing options...
Recommended Posts