lwlam Posted March 2, 2006 Posted March 2, 2006 Just received all of my gear and performing initial installation. I installed an AMD64 x2 3800+ with the Big Typhoon. At this point the mobo is out of the case. I attached all three power leads - 24pin, 12v, and floppy style 5v/12v from the board to the power supply. Ram is in and video card is in. Front panel wires (HDD LED, RESET, PWR, PWR LED) are connected. I flip the switch on the power supply. Before I push the power on the case, the system fan starts spinning, the Standby LED on the mobo is lit in red and the video card fan is spinning. I HAVEN'T pushed the case power button yet... When I do push power, nothing happens. No DRAM power light, no CPU fan. Is this board DOA? Thank you. Share this post Link to post Share on other sites More sharing options...
Pah Jongg Posted March 2, 2006 Posted March 2, 2006 ...connect a monitor...see if you get a picture... ...the power state may just be a BIOS setting...clear the BIOS... ...your PSU is out of spec...I'm just offering that as an FYI... Share this post Link to post Share on other sites More sharing options...
lwlam Posted March 2, 2006 Posted March 2, 2006 Thanks for the suggestions. Monitor is connected and there's nothing. Tried clearing BIOS as well. Thanks. Lester Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now