gokalper Posted February 9, 2006 Posted February 9, 2006 No matter what i do i cant pass super-pi on stock settings. I did however run prime 95 and the first core failed. In super-pi after affinity the 2nd core fails. But what confused me is OCCT i tested it for stability is said its ok. I swaped out mb,ram,psu, to no avail. Anyways i was wondering is OCCT stability test really reliable? Fails super-pi immediatly, yes affinity is set. Memtest is perfect. I am going to rma, but oculd it be something i am doing?? Damn OCCT confusing me...Any help. I will send the cpu out probably friday to get replaced. Quote Share this post Link to post Share on other sites More sharing options...
ComeUpon Posted February 9, 2006 Posted February 9, 2006 Do you have Super Pi running from two different directories? Quote Share this post Link to post Share on other sites More sharing options...
madu Posted February 9, 2006 Posted February 9, 2006 I pass everything EXCEPT OCCT! It wouldnt run for 5 mins..gives a instability issue.. Seems OCCT is still in beta.. from what I have seen, failing occt does not *necessarily* means there is a problem.. if you can pass 8+ prime then its better than passing occt.. but is strange u pass SPI in one core and prime in the other core.. Quote Share this post Link to post Share on other sites More sharing options...
gokalper Posted February 9, 2006 Posted February 9, 2006 omg i think that is the problem but i did fail my prime 95 on the first core....but i was running the mem at a 1/2 ratio.... I am an idiot. So so so stupid. I will run the prime 95 test again. Using only stock settings. But before it do, i will test my highest clock. WOW, im stupid. WOW Thank you! Quote Share this post Link to post Share on other sites More sharing options...
gokalper Posted February 9, 2006 Posted February 9, 2006 3800+ at 2.8ghz thats nice man.... ima on stock here..I want phase change Till then i will settle with the scythe ninja and two panaflos... WOW im dumb, i cnat believe i made that mistake. Seperate directories....omfg i need cofeeeee Quote Share this post Link to post Share on other sites More sharing options...
ComeUpon Posted February 9, 2006 Posted February 9, 2006 Haha. Happens to the best of us. Yeah, I got lucky. I kind of wish I had payed more attention the RAM when I built my machine, though. Now I'm stuck running this crappy divider till I pick up some Mushkin or OCZ PC4000. Quote Share this post Link to post Share on other sites More sharing options...
gokalper Posted February 9, 2006 Posted February 9, 2006 Ok, i have set my voltage to stock 1.35v, and my htt to 280, i pass 2m super pi I will do my 32 million passes tomorrow, for now though i set htt to 290, windows no boot. Increase voltage to 1.375v and boot in to windows, superpi fails on first core. Isn't it usually the second core to fail? Well, i will up my voltage to 1.4v brb. I do however want to achieve 2.5ghz on stock voltage, prime95 stable so i will run 24 hours of prime at 2.4ghz and increment to 2.5ghz. I have done this on an single core, and it worked for me. Hope to use this procedure, any one know if it works on the dual core, my speculation it'll take a 48hr burn in. BRB i will up the voltage and try 4m. Quote Share this post Link to post Share on other sites More sharing options...
gokalper Posted February 9, 2006 Posted February 9, 2006 Is there someway i can run super-pi to automatically choose the affinity, i try adding the -A1 command it dont work? Also should i use the percentage values on the vcore only after the 1.55v range, or is it better to use it earlier? Like i set vcore=1.35 and %=1.06 and obtain 1.43, is that better than just using 1.43 straight from vcore and no %??? Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.