Jump to content
Sign in to follow this  
ooztuncer

G.Skill HZ/Any other UCCC (2x1024) 260+ please post here

Recommended Posts

I heard 704-2BT works better for dividers, but i don't see any difference at all.

 

Opteron 165 @2.6GHz 289x9 1.5v memory on 180divider @260MHz 3448 2.6v

Share this post


Link to post
Share on other sites

I've had great success with 704-2BTA. I'm running stable at 270Mhz at 3-4-4-8 on 2.63v. Of course, I don't think I've seen a lot of variation that can be tied solely to the BIOS. Many people had great success with earlier BIOS's as well.

Share this post


Link to post
Share on other sites

Now 704-2BT and 704-2BTA the same thing....i've only seen 704-2BT where is the A version? Are you running your processor and memory sync 1:1? Did you tweak any timings on your memory or just used the Optimized default settings from the bios and check just the HTT and voltages....?

Share this post


Link to post
Share on other sites

704-2BTA removed some of the broken % adjustments for vcore that could cause you to fry your CPU. That's the only difference. Yes, I'm running my memory in sync. As for the rest of the values, I used values I found from the database that people used to achieve speeds similar to what I was aiming for (see the first post). I got it stable on the first try and haven't really experimented since then because I'm satisfied.

Share this post


Link to post
Share on other sites

hope this helps

{Code}

FSB Bus Frequency.............................285

LDT/FSB Frequency Ratio.......................4

CPU/FSB Frequency Ratio.......................10

PCI eXpress Frequency.........................100

 

CPU Voltage ..................................1.61

LDT Voltage ..................................145

ChipSet (NF4) Voltage ........................166

DRAM Voltage .................................2.6

+0.03 if not 3.2V ............................

 

Memclock (DRAM Frequency) ....................200

1T/2T Timing (Command Per Clock)..............1t

CAS Latency (Tcl).............................3.0

RAS# to CAS# delay (Trcd).....................4

Min RAS# active time (Tras)...................8

Row precharge time (Trp)......................4

Row Cycle time (Trc)..........................16

Row refresh cyc time (Trfc)...................18

Row to Row delay (Trrd).......................2

Write recovery time (Twr).....................3

Write to Read delay (Twtr)....................2

Read to Write delay (Trwt)....................4

Refresh Period (Tref).........................200MHz 3.9us

DRAM Bank Interleave..........................

 

DQS Skew Control..............................off

DQS Skew Value................................o

DRAM Drive Strength...........................normal

DRAM Data Drive Strength......................

Max Async Latency.............................9ns

DRAM Response Time............................

Read Preamble Time............................6.5ns

R/W Queue Bypass..............................8x

Bypass Max....................................4x

32 Byte Granularity...........................didabled

{/code}

Share this post


Link to post
Share on other sites
I'm using this bios now..==>>29/03/2006 Beta SLI-DR/Ultra-D/SLI-D,, NF4LD329-3 (oskar wu beta)

 

Which one is that, i only see the newest BETA BIOS being 3.30.06, where are you getting 29/03/2006 from?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...