malvare1 Posted February 7, 2006 Posted February 7, 2006 I the 2x1 gig pc4000 OCZ GX XTC kit, with my opty 170 and the expert sli mb Could you help with timings of this memory @255mhz. ? thanks Quote Share this post Link to post Share on other sites More sharing options...
red930 Posted February 7, 2006 Posted February 7, 2006 Stock timings should work...probably around 3-4-3-8 or so... Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 7, 2006 Posted February 7, 2006 Stock timings should work...probably around 3-4-3-8 or so... actually im looking more for the rest of the settings below the main timmings ,on my expert board (drive strenght, tref etc ) Quote Share this post Link to post Share on other sites More sharing options...
red930 Posted February 7, 2006 Posted February 7, 2006 Ah, sorry. I guess the only thing I know is mine likes tref = 1032, its probably quite similar to yours. I think my drive strength is 8...or maybe 7. I should really write them down sometime...sorry. Quote Share this post Link to post Share on other sites More sharing options...
SoyoJoe Posted February 7, 2006 Posted February 7, 2006 I have the same stuff, except mines running at 270. Quote Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted February 7, 2006 Posted February 7, 2006 did you check the Overclocking Database? Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 7, 2006 Posted February 7, 2006 did you check the Overclocking Database? Yes indeed but did not find my combination (opty 170/expert/gx xtc). I read also here that you were very confortable working with the GX xtc sticks, kind of help me deciding on buying them. I the database you have them at 250 mhz, i'm looking at 255-258 and those settings did not work for the desire speed. any help would be appreciated. Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 7, 2006 Posted February 7, 2006 I have the same stuff, except mines running at 270. Thanks but I see that you have a different board and the settings use on a non expert boards morelikely will not work on an expert as Angry have mentioned on another thread. thanks though. Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 7, 2006 Posted February 7, 2006 Ah, sorry. I guess the only thing I know is mine likes tref = 1032, its probably quite similar to yours. I think my drive strength is 8...or maybe 7. I should really write them down sometime...sorry. hehehehe, you have different memory than me thanks Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 7, 2006 Posted February 7, 2006 bump Quote Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted February 8, 2006 Posted February 8, 2006 Yes indeed but did not find my combination (opty 170/expert/gx xtc). I read also here that you were very confortable working with the GX xtc sticks, kind of help me deciding on buying them. I the database you have them at 250 mhz, i'm looking at 255-258 and those settings did not work for the desire speed.any help would be appreciated. well you will have to read the Overclocking Guide that is stuck to the top of this section, and then begin fooling with your setup. There's no person here that will just be able to give you numbers and you can get some overclock you are looking for. the OC Guide is there to teach you about the DFI Lanparty BIOS as well as how to use it for overclocking Athlon64/Sempron cpu's...you have to read, study, and try it for yourself. I've always maintained that a good overclock takes anywhere from 2 week to 2 months to achieve. Jumping right up to 250 is usually pretty simple, but when you want to go beyond that, then your time starts to get eaten up with testing testing testing testing testing testing testing testing testing Quote Share this post Link to post Share on other sites More sharing options...
malvare1 Posted February 8, 2006 Posted February 8, 2006 well you will have to read the Overclocking Guide that is stuck to the top of this section, and then begin fooling with your setup. There's no person here that will just be able to give you numbers and you can get some overclock you are looking for. the OC Guide is there to teach you about the DFI Lanparty BIOS as well as how to use it for overclocking Athlon64/Sempron cpu's...you have to read, study, and try it for yourself. I've always maintained that a good overclock takes anywhere from 2 week to 2 months to achieve. Jumping right up to 250 is usually pretty simple, but when you want to go beyond that, then your time starts to get eaten up with testing testing testing testing testing testing testing testing testing I understand, I thought I would get a bit more help than read read read from you specially since I bought this memory cause you reccomended it and mentioned to be well knowledgeable with it.. I'm not in a hurry to finish I just wanted a little help from you I guess it's not this way around here. hopefully another member can help me out . no biggie, Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.