Razzia Posted February 1, 2006 Posted February 1, 2006 Hi I just got myself a couple of new sata disks. (Raptor 36 gb + 250 gb Maxtor Maxline III) and after I installed them I have no post, and the power led flashes. I tried unmounting all my hardware and tried to locate the error. When I boot up the computer, when only the motherboard and cpu is installed the power led still flashes. No beep from the board. Then I installed my memory. Nothing changed. The same thing happens, when I install the videocard. My best guess is that the bios is dead or at least screwed in some way. I can't flash the bios, as I don't have a floppy drive. Is there some other way to flash the bios (Winflash is no option) or do I need to get a floppydrive? Do anyone of you have another solution? Quote Share this post Link to post Share on other sites More sharing options...
jumanji9696 Posted February 3, 2006 Posted February 3, 2006 My power led flashed as well with my old cpu and my Lanparty UT 250gb. Put in a new cpu and things worked again. I haven't gotten any answer myself on what exactly the flashing power led means but i *think* if might mean cpu failure. Then again things could be different for the NF3 Ultra-D's. Quote Share this post Link to post Share on other sites More sharing options...
Guest thespin Posted February 3, 2006 Posted February 3, 2006 Check that your cmos reset jumper is in the default not the reset position ... Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.