pblou24 Posted February 1, 2006 Posted February 1, 2006 I flash the bios to 704bta beta bios all gos ok. I hti F1 as promted then when it boots up again at the end of it i get this. Same gos for if i flash bios to 623-3. CMOS checksum error-Default loaded What gives? I'm i doing something to cause this? Also i should ask is this message i get normal? Here is the exact Ram i am using could this be the reason as to why i cant boot with both sticks and the issue with the flashing.? http://www.newegg.com/Product/Product.asp?...N82E16820146883 Quote Share this post Link to post Share on other sites More sharing options...
dhetz Posted February 1, 2006 Posted February 1, 2006 I flash the bios to 704bta beta bios all gos ok. I hti F1 as promted then when it boots up again at the end of it i get this. Same gos for if i flash bios to 623-3. CMOS checksum error-Default loaded What gives? I'm i doing something to cause this? can u load windows ? or maybe not ?or u cannot open bios setup page ? i think ur bios is corrupt.. and u have flashed bios from disk boot with DOS mode Quote Share this post Link to post Share on other sites More sharing options...
pblou24 Posted February 1, 2006 Posted February 1, 2006 No i can get into bios but when i flash bios using the Tmod 6.5 CD it gives me that error. The whole reason i'm flashing is that ti hope it will fix that fact that the board will not take 2 sticks of my OCZ. Quote Share this post Link to post Share on other sites More sharing options...
Guest Tmod Posted February 1, 2006 Posted February 1, 2006 No i can get into bios but when i flash bios using the Tmod 6.5 CD it gives me that error. Did you clear the CMOS after flashing? Did you enter the bios after clearing the CMOS and select load optimized defaults? Did you then re-enter the bios setup and set it up like you want it? Tmod Quote Share this post Link to post Share on other sites More sharing options...
pblou24 Posted February 1, 2006 Posted February 1, 2006 Did you clear the CMOS after flashing? Did you enter the bios after clearing the CMOS and select load optimized defaults? Did you then re-enter the bios setup and set it up like you want it? Tmod 1. Why would i clear the CMOS after flashing? 2.Well i could not get the pc to boot for some reason so i did in fact clear the CMOS per this links instructions.. http://www.dfi-street.com/forum/showpost.p...04&postcount=24 3.Yes i did. 4.The only thing i changed was the boot devices..CDrom 1, HD 2 & Floppy 3 so that i could load the Tmod 6.5 CD. Quote Share this post Link to post Share on other sites More sharing options...
pblou24 Posted February 2, 2006 Posted February 2, 2006 Bump....Come fellas i know someone out ther knows how to help me.... Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.