Charisi Posted January 30, 2006 Posted January 30, 2006 I just got a Lanparty UT nf3 Ultra-D mobo. I got everything hooked up and booted her up, and she has problems with 2 512M Kingston duel channel sticks. Msmolt and I have been working furiously, (more Msmolt working and me getting furious lol), and it runs absolutely fine without any problems on 1 stick. But, when both sticks are in, she wont get past memtest 3. It gets to 99% on test 3 and drops back to 52% and freezes. We tried the sticks in every dimm combo we could think of and it still does the same thing. We also tested both sticks seperately and they both passed memtest without any errors. If anyone has any advice I would be greatly appriciative. I really dont want to run on just 1 512 stick, but I have no choice at the moments, seeing as how I am NOT putting that piece of junk msi board back in. I really hope someone could shed some light on this subject. Thanks in advance. Quote Share this post Link to post Share on other sites More sharing options...
Charisi Posted January 30, 2006 Posted January 30, 2006 No one? Quote Share this post Link to post Share on other sites More sharing options...
Charisi Posted January 30, 2006 Posted January 30, 2006 Also, I got the hd reformatted, and reinstalled windows and all my drivers, and now it boots into windows fine, until I click the start button, then it locks...everytime. Did I get a bad board? Quote Share this post Link to post Share on other sites More sharing options...
smolt Posted January 30, 2006 Posted January 30, 2006 man stop trying to blame the board its only been two hours lol. your gonna have to wate till some of them nf4 pros get home from work :nod:In the mean time get your butt back on yahoo lol here i ran into this What every NF4 user should Know (the NF3 is bullit proof) Quote Share this post Link to post Share on other sites More sharing options...
blinker0 Posted January 30, 2006 Posted January 30, 2006 First What Bios are you currently using? What are the exact Model of Kingston Memory are you using. And what are your timmings currently set at? Quote Share this post Link to post Share on other sites More sharing options...
Charisi Posted January 30, 2006 Posted January 30, 2006 The timings are all set at auto. The exact Kingston I have is KHX3200AK2/1GR. I know it isnt the ram either, cause I just put the sticks in another rig and they were fine. And the bios is 8/24/2005. :confused: Quote Share this post Link to post Share on other sites More sharing options...
RGone Posted January 30, 2006 Posted January 30, 2006 I know it isnt the ram either, cause I just put the sticks in another rig and they were fine. Inaccurate statement. All you really know is the ram works in another computer but you do NOT know if the memory is compatible with two sticks in the NF3 you are trying to use the memory in. RGone... The timings are all set at auto. The exact Kingston I have is KHX3200AK2/1GR. I know it isnt the ram either, cause I just put the sticks in another rig and they were fine. And the bios is 8/24/2005. :confused: Quote Share this post Link to post Share on other sites More sharing options...
Charisi Posted January 30, 2006 Posted January 30, 2006 Well, yeah lol. Im just very frustrated that this isn't working. I ran my old single channel ram and it passed memtest without any problems. I checked Kingston's website, and this ram is listed as being compatable with this board. So frustrating. :confused: :confused: Quote Share this post Link to post Share on other sites More sharing options...
blinker0 Posted January 30, 2006 Posted January 30, 2006 this board has been picky from the start with memory. I was looking for information on those Kingston. But I would start with 2.9v on them and manualy setting the timmings to 2-3-2-6 in the bios. and see from there if it will boot. in orange slots Quote Share this post Link to post Share on other sites More sharing options...
Zaheyu Posted January 30, 2006 Posted January 30, 2006 try to disable bank interleave, cpc and dynamic counter Quote Share this post Link to post Share on other sites More sharing options...
Charisi Posted January 30, 2006 Posted January 30, 2006 I tried those recommended settings, and it wouldnt even load memtest. :sad: Quote Share this post Link to post Share on other sites More sharing options...
blinker0 Posted January 30, 2006 Posted January 30, 2006 Charisi You have a P/M Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.