Jump to content
Sign in to follow this  
airman

Peltiers

Recommended Posts

where can i get one?

 

->One of the best

 

->75-100watt

 

-aiRman

Share this post


Link to post
Share on other sites

www.dangerden.com . all the pelts ive got from them have been great thgey also sell a really nice meanwell 5inch bay psu for the pelt . are you cooling a cpu with it ?? cause if you are id suggest a 226watt pelt if your setup can handle it . you want to use at least double the watts that you cpu puts out .

Share this post


Link to post
Share on other sites

were am i gonna get that power rofl...i'm only running on a 300 watt psu :(

 

[EDIT] also...where do you plug in the 2 wires :P

Edited by aiRman

Share this post


Link to post
Share on other sites

if your using your psu youll need to put a molex on it . id highly suggest a seperate psu for the pelt . just be sure to get enought power to the pelt if it doesnt get enought power or you put to much heat on it with out removing heat from the hot side you could kill your cpu .

Share this post


Link to post
Share on other sites

A second PSU is basically a necessity for a peliter setup, unless you have a 550watt beast that can support it (even then I'd feel better with a Power Supply fully dedicated to the peltier. You can use a variety of methods to make both power supplys come on at the flip of a single switch. Such as using a relay or simply wiring them together. Check out some of the things this guy suggests for wiring the PSU.

 

Good luck with the peltier, although it sounds like you may have some second thoughts after hearing this news. Go for it man, it'll cost a little more money for an extra PSU, but the benifits will be amazing :)

Edited by ravix

Share this post


Link to post
Share on other sites

basically a peltier is a plate that transfers heat from one side to the other via electicity aka thermo- electric cooling the cold side goes on the cpu die the hot side need a great heatsink and fan or better yet a water block to carry or dissapate the heat

Share this post


Link to post
Share on other sites

you have to use a plate under the block with a cold plate under the cold side of the pelt . and ai doubt you would want to use a pelt on your nb . unless you mod a maze4 gpu block to fit on your n/b

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...