Jump to content
Sign in to follow this  
rgdiz

Beggin' for help again...........

Recommended Posts

Does anyone know what BIOS might be more friendly to the G.Skill HZ 2x1gb kit. I'm running 704-2BTA and I can't get stable at 250 FSB. I can get memtest from BIOS to run for 7+ hours but as soon as I try prime95 or memtest windows it fails.

The chips in the memory are supposed to be Samsung UCCC.

 

Thanks for any help/info you can give me.

Share this post


Link to post
Share on other sites
Guest Dynamic

What are your settings? Voltages/HTT/LDT? You need to be more specific with your configuration please. DFI has many memory timings, might be worth taking a look at those. Let me know...

Share this post


Link to post
Share on other sites

I have tried them, just had no luck. I am presently running Angry and Rgone's OC'ing test on my CPU and it fails Super Pi at FSB 248. I am using OCCT to try to stress it and see if it passes at 245. I thought that these CPUs would OC really well, but I can probably live with the 245 or in that neighborhood. I wasn't out to set any records, just wanted to drive fast and hang out with loose women. :nod:

Share this post


Link to post
Share on other sites

CPU VID 1.425

CPU VID Special 1.425 +113%

LDT 1.2

Chipset 1.5

Memory 2.6

Dram 01/02

LDT 3x

Multi 11

all other settings AUTO

Share this post


Link to post
Share on other sites

Looks like may increase mem alittle 2.7and nf4 may be to 1.6V and then it will be timings if those voltages won't get ya there.

Share this post


Link to post
Share on other sites

I ran the cpu/ram tests recommended by Angry and Rgone, and determined that my processor tops out at FSB 245 multi 11, and my ram tops out at FSB 250 (3 4 4 8 1t). These settings were with mostly defaults selected, 14.25v on cpu, cpu special +110%. I could probably get more out of them but I am aircooled and have had my cpu go to 60+ a couple of times testing. I hope the temps improve with a new cooler (Freezer 64) and the addition of Artic Silver.

 

Anyway, all I wanted was to run at FSB 250 x 10 or so, and I can get there now with FSB 237 x 11 = 2607, which is not spectacular, but not real shabby either. If I decide I want more I guess I'll have to go with a water cooling system, which might not be a bad idea since my computer room is normally about 80f degrees.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...