Guest Gamezy Posted January 17, 2006 Posted January 17, 2006 Ok, I recently changed case from an Anted Plusview 1100 to an Antec P180, upon trying to boot my PC in the new case, I'm getting nothing, not even a post. The 2 orange lights are on and all 4 diagnostic LEDs flash when i try to boot (both from the board and from the case). Tried clearing BIOS but didnt work. Any ideas what wrong? I read about a possible BIOS corruption but is this really possible from me just changing case??? It worked perfectly before hand, and now Im getting squat all. Any ideas? Thanks for your time. Quote Share this post Link to post Share on other sites More sharing options...
Sharp Posted January 17, 2006 Posted January 17, 2006 Hello, Brass stands all ok? Nothing causing a short or you forgot to plug all the power connectors into the board? The best thing to do would be to take the board out and power it on a flat non conductive surface. You know your power supply does not meet the DFI requirements. 480W and must be a true 24pin one. Quote Share this post Link to post Share on other sites More sharing options...
Guest Gamezy Posted January 17, 2006 Posted January 17, 2006 All power cables were in, no shorts. I'll try the board on a non conductive surface in the next few hours. Thanks for the PSU info, I'll grab one ASAP (been meaning to upgrade for a while anyway). Any other ideas would be great. Thanks for the feedback. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.