Angry_Games Posted January 15, 2006 Posted January 15, 2006 DFI LANPARTY nF4 Expert SLI-DR (712/07/2005 BIOS) AMD X2 3800+ dual core 2x1024MB OCZ PC4000EB (OCZ5002048EBPE-K) GeForce 6800GT, 390/1050 81.89 drivers Western Digital Raptor 36GB 10,000RPM SATA hdd Asus 52x Quiet-Trak CD-ROM Skyhawk 520w 24-pin ATX power supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 200 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - Auto PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - Auto CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.66v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Auto CAS Latency Control (Tcl)..................... - Auto RAS# to CAS# delay (Trcd)..................... - Auto Min RAS# active time (Tras)................... - Auto Row precharge time (Trp)...................... - Auto Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01: http://www.angrygames.com/ssdb/nf4/expert/..._3800ssdb-1.gif 3dMark2003: 3dMark2005: Aquamark 3d: ========== short description: 200x10 @ 2000Mhz, Auto + Auto voltages 3-3-7-2 @ 2.66v vdimm Share this post Link to post Share on other sites More sharing options...
Praz Posted July 14, 2006 Posted July 14, 2006 DFI LANPARTY UT nF4 SLI-DR Expert Socket 939 12/07/2005 BIOS AMD Athlon64 3700+ (San Diego) 2x1024MB OCZ PC4000EB Platinum OCZ5002048EBPE-K eVGA Geforce 7300GS, nVidia 84.21 drivers Western Digital Caviar SE16 WD2500KS 250GB Serial ATA II 7200RPM Hard Drive w/16MB Buffer 2 x RAID 1 OCZ ModStream OCZ52012U 520w 24-pin ATX power supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 200 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - Auto PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - StartUp CPU VID Control............................... - Auto CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20V Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.64v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 03 Min RAS# active time (Tras)................... - 08 Row precharge time (Trp)...................... - 02 Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: AquaMark ========== short description: 200x11 @ 2200Mhz, 1.400v (Default) 3-3-8-2 @ 2.64v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts