jrad77 Posted January 8, 2006 Posted January 8, 2006 allright sorry...back to business Tcl - 4.5 Trc - 22 Trfc - 24 Trcd - 7 Trrd - 7 Tras - 15 Trp - 7 Twr - 3 Twtr - 2 Trtw - 8 Tref - 200mhz 1.95us Twcl - 8clks Share this post Link to post Share on other sites More sharing options...
lowboy Posted January 8, 2006 Posted January 8, 2006 Ok you now know where you are copy this guide and study it so you will know what timings affect other timings and should give you a good starting point to adjust where needed. http://www.dfi-street.com/forum/showthread.php?t=28049 Share this post Link to post Share on other sites More sharing options...
jrad77 Posted January 8, 2006 Posted January 8, 2006 one last thing...ive now got it slightly overclocked to 210 x 11 with the ram 1:1 with ldt/fsd to auto....and now i can boot and im getting stable results from superpi and the 3dmarks...so i dont understand what my problem was in the first place...why is it that when everything was underclocked i couldnt boot..but now that im overclocked i can? Share this post Link to post Share on other sites More sharing options...
lowboy Posted January 8, 2006 Posted January 8, 2006 May be present timmings are better at overclocked speeds Share this post Link to post Share on other sites More sharing options...
Burky Posted January 8, 2006 Posted January 8, 2006 I use the exact same ram as him, except in the combination shown in my sig, and at 235x10 I use 1:1 and at 250x10 I use 5:6 and it gives me no hassle at all. Just keep the ratio as high as possible till it becomes unstable, then lower them until it becomes stable. Share this post Link to post Share on other sites More sharing options...
jrad77 Posted January 8, 2006 Posted January 8, 2006 Thanks burky...I'll keep that in mind... Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now