Jump to content
Sign in to follow this  
Kemp

Htt

Recommended Posts

Hello all first post ,

 

This is also my first amd based system for ocing . I own a Expert board and am starting to think that HTT 300 and over is not stable on this board. I ran memtest for 24 hours ram @ 275 3448 timings 0 errors. I ran prime 95 for 24 hours 0 errors this is all done @ 1.65 volts on a 146 Opteron . But when ever I try to run any 3dmark app it will freeze during test. Card will clock to 615/1800 but i have been running @ stock 550/1700 for testing purposes. LDT is @ 1.4 chipset is at 1.7 ram voltage is 2.8 as my reading has lead me to believe this ocz ram does not like more than 2.8 . Any ideas guys ? or do other Expert owners feel the same about the 300 HTT and maybe a bios update will fix this issue ?

 

thanks to all for help

 

-Jared

Share this post


Link to post
Share on other sites

I was really hoping to get some other Expert owners to post on this . If u dont have a chip that will do 300 htt on the highest stepping knock it back . i cant do 9x300 but i can do 10 x 295 . Any ideas ?

Share this post


Link to post
Share on other sites

Perhaps is memory a problem...My memory goes 285 mhz 3-3-2-7 in Prime95,memtest and 32M Super pi but in games,3Dmark,Aquamark no go,275 max. stable.

Share this post


Link to post
Share on other sites

well I am on water , and this is more or less going for benching clocks. Since I can do 2.8 (fx-57) @ 1.45 ........ I am just trying to figure this out since it is not equaling across the board.

Share this post


Link to post
Share on other sites

my eXpert has no probs running 311fsb(htt)

some timing need to be tweaked in the ram settings, look in the oc data base.

and i would also lower that cpu volts water cooled or not.

damn that vid card is a monster!!!! :nod:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...