Jump to content

Corsair Memory Probs.

Recommended Posts

Hi i'm from Germany........


My Ram dont work stability with this MB is that normal??? I have the newest BIOS from DFI....


My Config:

Genie BIOS Settings:


FSB Bus Frequency - 275

LDT/FSB Frequency Ration - AUTO

CPU/FSB Frequency Ratio - Auto

PCI eXpress Frequency - 100Mhz


CPU VID StartUp Value - 1.550v


CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 126%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.56v

DRAM Voltage Control - 2.80v


DRAM Configuration Settings:


DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 19 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 04 Bus Clocks

Refresh Period (Tref) - 2560 Cycles

Write CAS Latency (Twcl) - 05 Bus Clocks

DRAM Bank Interleave - Enabled


DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)



I need help......... (I have read in a German Magazin : That Corsair Memory don't work with this Board, that's true?.... DFI say: with OCZ Memory is the board stabil...

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now
  • Create New...