hajj_3 Posted January 4, 2006 Posted January 4, 2006 icon57, i infact have the Opty 146 CAB2E 0545, not cabne, does your 148 only do 2.8ghz? my 146 does 2.75 with same stepping and week. is your ram the gskill LA ram or one of the other ones as i might be able to copy your ram settings. Share this post Link to post Share on other sites More sharing options...
Markus_d Posted January 4, 2006 Posted January 4, 2006 try dropping your multiplier on the cpu, and see if you can run higher HTT. also, I run 1.6v right now and im burning in @ 10*302. there is no problem with 1.6v... Share this post Link to post Share on other sites More sharing options...
hajj_3 Posted January 4, 2006 Posted January 4, 2006 board only lets you use 1.55v, would i have to use 1.45*110%? Share this post Link to post Share on other sites More sharing options...
Markus_d Posted January 4, 2006 Posted January 4, 2006 yes, do so... it will give you 1.552v windowa read, but something like 1.59v in bios i think.. but if you do not gain anything, drop it down to your current setting.. Share this post Link to post Share on other sites More sharing options...
Kyo Posted January 4, 2006 Posted January 4, 2006 If your FSB is 275 Mulitpler - x 10 Divider - 140 Then his ram is running at just below 200Mhz and his CPU is around 2750Mhz. Got my new Opty 148 atm but i have not clocked it yet as it still on default. Will be intresting though. Share this post Link to post Share on other sites More sharing options...
hajj_3 Posted January 4, 2006 Posted January 4, 2006 148 cabye, NICE!!! right, im using 1.5*9.7% (1.65v) and running prime95 with cpu @ 2.85 now, fingers crossed it can do 12 hours without errors. cpu is 48c and chipset 44c under load using small in prime95. will reply here whether it passes prime95 or not. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now