Jump to content
Sign in to follow this  
masteroftherealm

Ut NF3 NoBoot

Recommended Posts

Board has the 2leds lit up and the fans start but thats as far as it goes.

Any ideas??

 

 

Make sure you connected all 20/24-pin connectors from PSU on the motherboard.

 

Cause samething happened to me when i forgot to plug in the 4 extra pin connector, only the fans would powerup everything else was dead until i noticed the 4pin wasnt connected.

 

Anyways.. just a tought! :)

Share this post


Link to post
Share on other sites

Same problem with me. One moment, the system is 100% stable (24 hrs. prime & OCCT) then 2 weeks or a month after, it wont boot up to BIOS. I would open the case, unplug and plug the RAM, vid card, hard drive connections & clear the CMOS. Sometimes this cures it, sometimes it doesnt. But once it boots up, it would then be stable again for the longest time and would show up again after a few weeks :(

 

Does your keyboard light have no power when this happens to you? Cause mine's dead when this happens. Hope somebody knows why this happens cause its driving me crazy.

Share this post


Link to post
Share on other sites
Same problem with me. One moment, the system is 100% stable (24 hrs. prime & OCCT) then 2 weeks or a month after, it wont boot up to BIOS. I would open the case, unplug and plug the RAM, vid card, hard drive connections & clear the CMOS. Sometimes this cures it, sometimes it doesnt. But once it boots up, it would then be stable again for the longest time and would show up again after a few weeks :(

 

Does your keyboard light have no power when this happens to you? Cause mine's dead when this happens. Hope somebody knows why this happens cause its driving me crazy.

 

Yup no kb light either!

Nope only 754board i have so cant test the processor. However its brand new from the box into the board so...

Share this post


Link to post
Share on other sites
Yup no kb light either!

Nope only 754board i have so cant test the processor. However its brand new from the box into the board so...

 

Its most likely the board, as I have tried different vid cards and memory also. My PSU also works with no problem on my other system. Try clearing a couple of times by removing the battery and powercord for a minute. I've also noticed that sometimes my optical mouse also doesnt work, this will light up after a clearing but the keyboard and monitor will still be dead. You should be able to boot up after a few tries.

Share this post


Link to post
Share on other sites
I take it I can RMA this as I cant be expected to do that everytime???

Ill PM A_G and see what he says.

(Or not as he has PM'sturned off)

 

Yep I agree :) Pls let me know how you resolve this as I might be taking a similar action. Best wishes.

Share this post


Link to post
Share on other sites

I had the same problem then found out that the board was grounding to the case though a pin that was to long, put a peice of cardboard between the case and motherboard and the problem was solved.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×