bikspk Posted December 23, 2005 Posted December 23, 2005 This may have nothing to do with the DFI board but I ran the overclocking utility that comes with CCC (5.13) and, while it seemed to give me a nice overclock, 3DMark05 barfs out almost immediately when I ran it at the new settings. After reboot and reset OC to default, 3Dmark05 worked okay. Any ideas or advice?? ATITool was great with the X800XL but doesn't work for X1?00 series yet and I trust it more since it searches for artifacts AND monitors temperature rather than looking at temp. Quote Share this post Link to post Share on other sites More sharing options...
haelduksf Posted December 23, 2005 Posted December 23, 2005 ATITool does work with the 1x00s; I've got my XL up to 650/650 with version 0.25 Beta 10. Quote Share this post Link to post Share on other sites More sharing options...
irjus Posted December 23, 2005 Posted December 23, 2005 ati tool vers 0.25 beta 10 dont work with RX1800XT 512 , i get artifacts at the standard clock Quote Share this post Link to post Share on other sites More sharing options...
moreDread Posted December 23, 2005 Posted December 23, 2005 ATITool does work with the 1x00s; I've got my XL up to 650/650 with version 0.25 Beta 10. Mine artifacts and its the same card but probably a different manufaturer. Like mobo's no 2 cards are the same and other users of ATITool have had problems. Quote Share this post Link to post Share on other sites More sharing options...
DaDevil Posted December 27, 2005 Posted December 27, 2005 ati tool vers 0.25 beta 10 dont work with RX1800XT 512 , i get artifacts at the standard clock I had problems with atitool not starting properly due to some driver issues, but I got it to work on 5.10 - 5.12 in win32 and win64, havent tried 5.13 yet due to catalyst not uninstalling/installing. so it is fully compatible with the x1800xt, it may be driver related or some conflict elsewhere. i did see one glitch, on startup of the 3d view, almost all the edges are artifacted, to solve this just hit scan for artifacts and go back to the 3d cube. Quote Share this post Link to post Share on other sites More sharing options...
bikspk Posted December 27, 2005 Posted December 27, 2005 The gist of the discussion in the ATITool beta forums over at techpowerup.com is that ATITool can't set frequencies on X1800 properly and recommend using Overclocker or some other utility until it's fixed. There is also discussion about using the old scanning method for artifacts. On another issue - If I play bf2 with the standard overdrive clocks I'll surely get VPU recover in about 15 minutes, have to manually set the fan to 50%, then Alt-Tab back to bf2 and, Ouila!, back in action. The built in CCC Overdrive sucks IMHO. Quote Share this post Link to post Share on other sites More sharing options...
haelduksf Posted December 28, 2005 Posted December 28, 2005 Yeah, and a lot of people have been having problems with this motherboard and CCC. I would get rid of it altogether, if I were you. I'm using an 1800XL with the .25beta10, and all I had to do was switch to the :old artifact scanning method". I'll check out that forum though, thanks for the heads up. Quote Share this post Link to post Share on other sites More sharing options...
BiOMECHANiK Posted December 28, 2005 Posted December 28, 2005 A new version of ATI Tools, 0.25 Beta 11 is out at techpowerup Fixed Shared Memory Fixed "Minimum Step" displaying random number on X1000 Series Fixed a few "Mhz" / "MHz" typos Added a 250 ms delay when loading a profile between setting voltage and setting clocks Fixed the lost manifest for XP Visual Styles ATITool will disable 2D/3D switch on X1800XT now Memory OC disabled for X1300, it doesn't work yet Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.