Quad Master Posted December 20, 2005 Posted December 20, 2005 Hi Guys, Currently i am begining to assemble my new rig. You can see my Rig 2 in my signature. I wanted to know which would be the best BIOS to run my OCZ Gold VX stable. I want it to run such that it does not give ne errors in memtest86. In 623 & 702-2 BIOS the mem was giving some errors in memtest86. Ram was in yellow slot only. Also the Gold VX is purchased from my friend he has done the burnin pretty well. Also wanted to know if there is ne harm in using onboard audio with the system overclocked as for a month or two i will use onboard audio. If the onboard audio will create problem i have a Creative SBlive 5.1 in another rig can put that here. Share this post Link to post Share on other sites More sharing options...
Quad Master Posted December 20, 2005 Posted December 20, 2005 Bump ..... Waiting for reply. Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 20, 2005 Posted December 20, 2005 Hello, The onboard Audio will work without causing any damage to the board / windows stability. What power supply are you using? Did you plug 4 power connectors into the board? Your memory requires 3.2v to run at 200Mhz and 2-2-2-8 timings. Share this post Link to post Share on other sites More sharing options...
Quad Master Posted December 20, 2005 Posted December 20, 2005 Thanks a lot. Power supply is Antec TP 2.0 550W but its my friends. I have to get mine. Any particular BIOS specially for the Gold VX. Share this post Link to post Share on other sites More sharing options...
A6437 Posted December 20, 2005 Posted December 20, 2005 I have one stick of OCZ VX 512mb PC4000 running at 3.3v 2-2-2-5 stable and i have the 6-23 bios passes memtest and primestable for 9hrs Share this post Link to post Share on other sites More sharing options...
pooldoc Posted December 20, 2005 Posted December 20, 2005 It took 3.4 to get my vx stable at 250,2-2-2-8. Used both 6-23bta and 7-04 bta, dimms in orange slots. Unfortunately, my vx went to rma for the 2nd time, probably due to being on 4v jumper. They are sending me pc 4200 EL Plats this time, tired of running high volts. Make sure you put a fan or 2 on your vx. Pooldoc Share this post Link to post Share on other sites More sharing options...
Franky Posted December 20, 2005 Posted December 20, 2005 I believe his question is: Any particular BIOS specially for the Gold VX. I am also looking for this answer. Share this post Link to post Share on other sites More sharing options...
wbork Posted December 21, 2005 Posted December 21, 2005 I've had good luck with the 704 bta's. I loaded optimized defaults, changed main settings (2-2-2-6 ) , and up'd volts. My vx runs great. Share this post Link to post Share on other sites More sharing options...
Quad Master Posted December 21, 2005 Posted December 21, 2005 Thanks for ur inputs. More suggestions are welcome. Share this post Link to post Share on other sites More sharing options...
cjoe7 Posted December 21, 2005 Posted December 21, 2005 It took 3.4 to get my vx stable at 250,2-2-2-8. Used both 6-23bta and 7-04 bta, dimms in orange slots. Unfortunately, my vx went to rma for the 2nd time, probably due to being on 4v jumper. They are sending me pc 4200 EL Plats this time, tired of running high volts. Make sure you put a fan or 2 on your vx. Pooldoc If you're using VX, place your memory in the yellow slots. Its supposedly better for higher voltage BH5/CH5 memory. cjoe Share this post Link to post Share on other sites More sharing options...
Quad Master Posted December 21, 2005 Posted December 21, 2005 I have place the memory in the yellow slot only , neways thanks Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now