Jump to content
Sign in to follow this  
tarabas

DFI + Twinmos Speedpremium UTT impossible??

Recommended Posts

Sorry for my english :)

 

I have a large coldboot problem with my DFI Ultra-d and 2x512 Twinmos Speed Premium UTT. With this Rams it is impossible to coldboot twice a day. the first coldboot is fine but with the second the Board won´t boot( 3 LEDS)

 

I´ve tested both Ram-modules......error-free

I´ve tested all Bank constellations.....no luck

I´ve tried all Bios-Versions from 310 to 704-2BTA....no luck

I use a 24pin PSU....so enough power

 

Please help. What can I do?????

 

 

Greetings

 

tarabas

Share this post


Link to post
Share on other sites

Hello,

 

Are these memory module new or have you been using them for a while?

Overclocking them with a lot of voltage?

 

Have they ever worked normally?

Share this post


Link to post
Share on other sites

What power supply is it?

 

So the problem only happens with these modules?

(Have you tried some other memory modules)

Share this post


Link to post
Share on other sites
Dunno if this is your problem, but that power supply is almost assuredly too weak for that board/system.

 

 

But with other Rams it works perfectly....

Share this post


Link to post
Share on other sites

Are you useing the JP-17? If so check to see if the Yellow LED on the right side of the DIMM sockets are Lit up when the computer is turned off, But power is still connected.If so you will have to use a Modified jumper setting, To get this to stop.

 

And the 380WATT PSU is way to Small

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×