Jump to content
Sign in to follow this  
Jibby

Upping 3.3v rail trick

Recommended Posts

I was upping the rail to 3.3v and I set the jumper like its supposed to be. I, for some reason, cannot get options for more than 3.2v. What am I doing wrong? I left the big jumper down one set of pins and placed a single jumper on 2 & 3 at the top of the board. I saw more voltage options but then I cleared cmos and now I can't get more than 3.2.

Share this post


Link to post
Share on other sites

I didn't use auto. Do I need to put the jumper back to default and redo this though when I reset the cmos? I couldn't see the options anymore after I reset the cmos.

Share this post


Link to post
Share on other sites

Try this:

 

1 - load optimized default and clear cmos

2 - put the jumper of 4v in default position

3 - restart, load optimized default, save and exit

4 - go again in bios and select a cpu vid control (no auto!)

5 - restart with bootable floppy

6 - switch off cpu, unplug power cord and put the jumper 4v in 2-3 position

7 - power on and go in the bios

 

good luck :)

Share this post


Link to post
Share on other sites

Well even though i won't be using the 4v jumper just the 1 jumper to get the options for higher voltage without using the 5v rail. Thanks for your help and I will give it a go. When I clear the cmos after I get all this to work, do I need to put the jumper back in the default position and redo those steps or can I just clear cmos and then go into bios?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...