Jump to content
Sign in to follow this  
xinty

newbe need help.

Recommended Posts

hi there,

 

i just brought a nF4-D which is non-Ultra.

 

i using TCCD to try OC.

but i stuck at 225HTT 2.5.3.3.8 1T with 623 bios.

i using sata 4 port for my sata HD.

i cant pass the DMI verification screen.

so i assume is due to the HD.

so i try each of them, but i still cant get though the DMI verification.

therefore, can some1 help me.

i think i left something to be adjust in the bios.

Share this post


Link to post
Share on other sites

10x ace.

but i cant find the PCI frenquency.

i only see the PCIex frequency, which is 100.

which section of the bios is PCI frenquency belong to?

 

sorry for my poor english.

Share this post


Link to post
Share on other sites
10x ace.

but i cant find the PCI frenquency.

i only see the PCIex frequency, which is 100.

which section of the bios is PCI frenquency belong to?

 

sorry for my poor english.

I don't think it is there on this board.

 

Read the guide and start over with your OCing.

Share this post


Link to post
Share on other sites
10x, i have got though this thread b4, when i using nF3-ultra-d.

so what u mean by memory issue?

is that mean my memory setting in bios?

Yep.

 

Overclocking memory can be tricky. All of those settings in the BIOS can affect your stability. If just one of them is off you can stop yourself from booting.

 

What voltage are you running your memory at?

 

Also, you might want to consider changing your PSU. Especially if you want to OC.

PSU Requirements

http://www.dfi-street.com/forum/showpost.p...73&postcount=13

Recommended PSU thread

http://www.dfi-street.com/forum/showthread.php?t=10854

Share this post


Link to post
Share on other sites

i running them at 2.8vdimm still cant post.

if i only run 200htt will drive strength affect my stabability?

cos i set to level 7 and 2.

tref auto 1:1 in window show 200 15.6.

is it correct?

i think my ram is rated at 3.9.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...