kissland Posted October 19, 2005 Posted October 19, 2005 I have TwinX pack 512mb x2 corsair 4400c25(0527140-6) ı put them all of the slot but only 1 and 2 slot can work... with the other slots ı can't open computer gives 3 led error (cpu detected) ı can overclock Athlon 64 3000+ Venice @2700 mhz 300x9 in single channel....what should ı do....how can ı use double channel.... Share this post Link to post Share on other sites More sharing options...
Boppo Posted October 19, 2005 Posted October 19, 2005 Try these settings http://www.dfi-street.com/forum/showpost.p...863&postcount=4 Share this post Link to post Share on other sites More sharing options...
kissland Posted October 19, 2005 Posted October 19, 2005 ı try but nothing change.... when ı put one of the ram to the third and fourth slot ,ı can't open computer... when ı put one of them to the second slot , cpu-z shows these ram in third slot... Share this post Link to post Share on other sites More sharing options...
kissland Posted October 24, 2005 Posted October 24, 2005 my rams pass the memtest give 0 errors... ı use my rams in another motherboard and they work proporly in dual channel... ı use XXXX ram in my dfi board work proporly in dual...ı use 5 kind of dfi bios nothing is change...any one have an idea... please help Share this post Link to post Share on other sites More sharing options...
Sharp Posted October 24, 2005 Posted October 24, 2005 Hello, Its a Corsair thing and that is why DFI do not recommend Corsair for their nF4 boards. Did you try BIOS 704-2BTA? # Also you must clear the CMOS for a few minutes after any BIOS flash. # And you must never load a CMOS reloaded profile from a previous BIOS when using a new BIOS. Share this post Link to post Share on other sites More sharing options...
FiL666 Posted March 1, 2007 Posted March 1, 2007 I use the same RAM in the orange slots (2-4) with 623 bios... then try separately the RAM module with memtest also if have already tried... then post the answers. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now