s14 Posted October 16, 2005 Posted October 16, 2005 6 errors in test number 7 can be heat.....test 7 errors do no indicate bad ram. Prime is known to have issues with 2 cores....did you run them in the same folder? or separate ones? I'm glad to hear that test 7 errors do not indicate bad ram actually i think that made my day. So i'm down to 3 errors, any further recommendations on bios settings to change based on the ones you gave me before? When you say heat, you mean the ram is getting too hot? even with the copper heat spreaders or whatever on the ram? How can i cool them down? Also when i upped the chipset voltage yesterday as per your settings you suggested, i'm getting higher temp readings on the cpu and nf4 chipset in motherboard monitor? is this normal? Regarding Prime, i made two seperate folders for each. When i had the faulty ocz ram a while back i used to always get that rounding error i posted before and could never actually an instance of prime at all. cheers Share this post Link to post Share on other sites More sharing options...
JMC Posted October 16, 2005 Posted October 16, 2005 Thanks a lot Ryder. The settings posted above managed to get my errors on test #7 are gone now Works like a charme for me now Greets JMC Share this post Link to post Share on other sites More sharing options...
RyderOCZ Posted October 16, 2005 Posted October 16, 2005 Heat on the ram can be removed like this....many suggestions here: http://www.xtremesystems.org/forums/showthread.php?t=47413 Share this post Link to post Share on other sites More sharing options...
s14 Posted October 16, 2005 Posted October 16, 2005 Thanks a lot Ryder. The settings posted above managed to get my errors on test #7 are gone now Works like a charme for me now Greets JMC i'm jealous Share this post Link to post Share on other sites More sharing options...
trinibwoy Posted October 17, 2005 Posted October 17, 2005 So if you leave the FSB at 200 and set the 180 divider....it doesn't boot? No I don't want you to run there, I just want you to try it....leave all the other bios settings the same. Thanks Ok, it worked with the 180 divider. It also works with the 150 and 166 dividers. With the 150 divider I'm able to get back up to 2400Mhz on the CPU - 266*9 while keeping memory at 200Mhz. Seems fine so far but I can't get any lower divider to work!! I was at 289*9 (2.6Ghz) on the 140 (7/10) divider with my corsair. But this OCZ doesn't seem to work with anything lower than the 150 divider. I know it's not my CPU or board since they were doing ~ 290FSB for months before I installed the new memory. Share this post Link to post Share on other sites More sharing options...
trinibwoy Posted October 18, 2005 Posted October 18, 2005 ^^ bump Share this post Link to post Share on other sites More sharing options...
Boppo Posted October 18, 2005 Posted October 18, 2005 If you are waiting for info from Ryder, why don't you email him? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now