Jump to content


Photo
- - - - -

:(


  • Please log in to reply
4 replies to this topic

#1 r00ter4u

r00ter4u

    New Member

  • Members
  • 21 posts

Posted 06 October 2005 - 03:59 AM

I can't get past 230FSB. i'm not sure what else to do, at 235 it POSTs then restarts. if i set 1/01 it doesn't POST at all. i know i have to play with the voltages. i'm just not sure what i could change. atm the ratio is 9/10 someone help :(

bah. 230 doesn't work either. ran prime95 and it BSOD on me.

#2 THunDA

THunDA

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 7030 posts

Posted 06 October 2005 - 11:22 AM

2x Crucial 512MB 184-Pin DDR SDRAM Unbuffered DDR 400 - CL=3 V=2.6
2x Crucial 1GB 184-Pin DDR SDRAM Unbuffered DDR 400 -CL=3.


Are you running all that together ? That alone might cause problems..

You should read the overclocking guide in my sig..

#3 r00ter4u

r00ter4u

    New Member

  • Members
  • 21 posts

Posted 06 October 2005 - 12:22 PM

Are you running all that together ? That alone might cause problems..

You should read the overclocking guide in my sig..


i don't understand how that could be a problem. usually this computer runs alot of graphics apps so i need the extra ram for those apps.

the FSB is stable at 230 but unstable any higher. sorry. made a mistake previously :/ but it is stable at 230

i tried reading the guide. and its taking me a while to fully understand what some of it means.

#4 alleyezonme3

alleyezonme3

    Member

  • Members
  • PipPip
  • 120 posts

Posted 06 October 2005 - 02:11 PM

Wow, with that ram you won't be able to get any higher than 230 (maybe 240 maxish). If you are going to overclock and use more than one stick make sure they are the exact same models. Also, if you are using 4 sticks you won't be able to get higher. Usually 2 GB (2x1GB sticks) or 1 GB (2x512MB sticks) is the best thing for overclocking. Anything else and you will have a lot of trouble.

#5 r00ter4u

r00ter4u

    New Member

  • Members
  • 21 posts

Posted 06 October 2005 - 02:28 PM

Wow, with that ram you won't be able to get any higher than 230 (maybe 240 maxish). If you are going to overclock and use more than one stick make sure they are the exact same models. Also, if you are using 4 sticks you won't be able to get higher. Usually 2 GB (2x1GB sticks) or 1 GB (2x512MB sticks) is the best thing for overclocking. Anything else and you will have a lot of trouble.



well i can take the 2x 512 sticks out. 1gb of ram won't kill me. i think