Jump to content

Corsair DDR1 + DFI Lanparty NF4 939 (stock, stable settings for many t


Recommended Posts

Ok, Rgone and I have been through a lot of testing this last week or so with a LOT of Corsair modules.

 

Below are all of the kits that I have tested, and he has tested. All of them work with the settings we show you.

 

If you cannot get your modules from Corsair to work, I suggest you contact Corsair, or their House of Help forums as there isn't much we can do for you if your Corsair memory doesn't work with the settings we provide you

Share this post


Link to post
Share on other sites

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

DFI LANPARTY nF4 SLI-DR - 7/04-2BTA BigToe BIOS

 

AMD Athlon64 X2 4400+ Dual Core

 

2x1024MB Corsair CMX1024-3500LLPRO (XMS3502v1.2):

cmx1024-3500LL_Pro.jpg

 

Engineering Sample Geforce 6800GT, 78.03 drivers

 

Western Digital 36GB 8mb cache 10,000RPM "Raptor" hdd

 

NEC 3540A Black IDE DVD-RW Drive

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

2gb_3500LLpro-bios1.jpg

 

2gb_3500LLpro-bios2.jpg

 

2gb_3500LLpro-bios3.jpg

 

 

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  200

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.200v

CPU VID Special Control.......................  -  Above VID * 110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  2.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  06 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  09 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/Corsair/2gb_3500LLpro-1.jpg

 

 

3dMark2003:

 

2gb_3500LLpro-2.jpg

 

 

3dMark2005:

 

2gb_3500LLpro-3.jpg

 

 

Aquamark 3d:

 

2gb_3500LLpro-4.jpg

 

 

==========

 

 

 

short description:

200x11 @ 2200Mhz, 1.200v + 110%

2.0-3-6-2 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4

 

SLI-DR - 7/04-2BTA BigToe BIOS

 

AMD Athlon64 3200+ Venice

 

2x512MB Corsair PC3200XL (XMS3208v1.2)

cmx512-3200xl.jpg

 

XFX GeForce 7800GTX 256MB, 78.03 drivers

 

Hitachi 80GB 8mb cache 7,200RPM SATA II hdd

 

NEC 3540A Black IDE

 

DVD-RW Drive

 

OCZ PowerStream

 

OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

3200xl-bios1.jpg

 

3200xl-bios2.jpg

 

3200xl-bios3.jpg

 

 

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  200

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.300v

CPU VID Special Control.......................  -  Above VID * 110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  2.0

RAS# to CAS# delay (Trcd).....................  -  02 Bus Clocks

Min RAS# active time (Tras)...................  -  05 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  17 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/Corsair/3200xl/3200xl-1.jpg

 

 

3dMark2003:

 

3200xl-2.jpg

 

 

3dMark2005:

 

3200xl-3.jpg

 

 

Aquamark 3d:

 

3200xl-4.jpg

 

 

==========

 

 

 

short description:

200x10 @ 2000Mhz, 1.300v + 110%

2.0-2-5-2 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4

 

SLI-DR - 7/04-2BTA BigToe BIOS

 

AMD Athlon64 X2 4400+ Dual Core

 

2x512MB Corsair CMX512-4400C25PT (XMS4404v1.1)

4400c25pt_module.jpg

 

Engineering Sample GeForce 6800GT 256MB, 78.03 drivers

 

Western Digital 36GB Raptor 10,000RPM SATA hdd

 

NEC 3540A Black IDE

 

DVD-RW Drive

 

OCZ PowerStream

 

OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

4400C25PT-bios1.jpg

 

4400C25PT-bios2.jpg

 

4400C25PT-bios3.jpg

 

 

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  200

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.200v

CPU VID Special Control.......................  -  Above VID * 110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  09 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/Corsair/4400c25pt/4400C25PT-1.jpg

 

 

3dMark2003:

 

4400C25PT-2.jpg

 

 

3dMark2005:

 

4400C25PT-3.jpg

 

 

Aquamark 3d:

 

4400C25PT-4.jpg

 

 

==========

 

 

 

short description:

200x11 @ 2200Mhz, 1.200v + 110%

2.5-4-8-4 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4

 

SLI-DR - 7/04-2BTA BigToe BIOS

 

AMD Athlon64 X2 4400+ Dual Core

 

2x512MB Corsair CMX512-3200C2 (XMS3202v1.2)

cmx512-3200c2_module1.jpgcmx512-3200c2_module2.jpg

 

Engineering Sample GeForce 6800GT 256MB, 78.03 drivers

 

Western Digital 36GB Raptor 10,000RPM SATA hdd

 

NEC 3540A Black IDE

 

DVD-RW Drive

 

OCZ PowerStream

 

OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

3200C2-bios1.jpg

 

3200C2-bios2.jpg

 

3200C2-bios3.jpg

 

 

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  200

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.200v

CPU VID Special Control.......................  -  Above VID * 110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Auto

CAS Latency Control (Tcl).....................  -  Auto

RAS# to CAS# delay (Trcd).....................  -  Auto

Min RAS# active time (Tras)...................  -  Auto

Row precharge time (Trp)......................  -  Auto

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  17 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/Corsair/C2/3200C2-1.jpg

 

 

3dMark2003:

 

3200C2-2.jpg

 

 

3dMark2005:

 

3200C2-3.jpg

 

 

Aquamark 3d:

 

3200C2-4.jpg

 

 

==========

 

 

 

short description:

200x11 @ 2200Mhz, 1.200v + 110%

2.5-3-8-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4

 

SLI-DR - 7/04-2BTA BigToe BIOS

 

AMD Athlon64 X2 4400+ Dual Core

 

2x512MB Corsair CMX512-3200C2 (XMS3202v5.1)

cmx512c2-module1.jpgcmx512c2-module2.jpg

 

Engineering Sample GeForce 6800GT 256MB, 78.03 drivers

 

Western Digital 36GB Raptor 10,000RPM SATA hdd

 

NEC 3540A Black IDE

 

DVD-RW Drive

 

OCZ PowerStream

 

OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

 

 

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  200

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.200v

CPU VID Special Control.......................  -  Above VID * 110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Auto

CAS Latency Control (Tcl).....................  -  Auto

RAS# to CAS# delay (Trcd).....................  -  Auto

Min RAS# active time (Tras)...................  -  Auto

Row precharge time (Trp)......................  -  Auto

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  17 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/Corsair/cmx512c2/cmx512c2-1.jpg

 

 

3dMark2003:

 

cmx512c2-2.jpg

 

 

3dMark2005:

 

cmx512c2-3.jpg

 

 

Aquamark 3d:

 

cmx512c2-4.jpg

 

 

==========

 

 

 

short description:

200x11 @ 2200Mhz, 1.200v + 110%

3.0-3-8-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

Plain Corsair 4400C2.5

 

these are the EXACT same modules as the Platinum 4400C2.5 I listed above.

 

Just in case you missed that entry, here it is again:

http://www.dfi-street.com/forum/showpost.p...863&postcount=4

 

the ONLY difference I can see, is one is black heatspreaders, one is silver heatspreaders (whatever color that is).

 

 

 

 

 

corsair440c25-1.jpg

 

corsair440c25-2.jpg

 

corsair440c25-bios-1.jpg

 

corsair440c25-bios-2.jpg

 

corsair440c25-bios-2b.jpg

 

 

 

 

 

 

==========================

Share this post


Link to post
Share on other sites

here's my OC Database entry that I am posting right now (for the previous post above this one - http://www.dfi-street.com/forum/showpost.p...885&postcount=7) :

 

 

 

DFI LANPARTY nF4 SLI-DR NF44 SLI-DR - 6/23-2 BIOS (Oskar Wu Alpha BIOS)

 

AMD Athlon64 3200+ Venice core

 

2x512MB Corsair 4400C2.5 (XMS512-4400C25, XMS4404v1.1)

 

Sapphire Radeon X300SE 128MB PCI-E, ATI catalyst 5.6 Drivers

 

Hitachi 80GB SATA II hdd (8MB cache)

 

ASUS CD-S520/A5 Black

 

IDE CD-ROM Drive

 

OCZ PowerStream

 

OCZ600ADJ ATX 600W Power Supply - Retail

 

Thermalright SLK-948U bolt-thru heatsink + Enermax 92mm adjustable fan

 

*

*

 

corsair4400c25_275x10_bios-1.jpg

 

corsair4400c25_275x10_bios-2.jpg

 

corsair4400c25_275x10_bios-2b.jpg

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 275

LDT/FSB Frequency Ration - AUTO

CPU/FSB Frequency Ratio - Auto

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.550v

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 126%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 19 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 04 Bus Clocks

Refresh Period (Tref) - 2560 Cycles

Write CAS Latency (Twcl) - 05 Bus Clocks

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/corsa...25-275x10-1.jpg

 

 

3dMark2003:

 

corsair4400c25-275x10-3.jpg

 

 

3dMark2005:

 

corsair4400c25-275x10-4.jpg

 

 

Aquamark 3d:

 

corsair4400c25-275x10-2.jpg

 

 

Everest Home Edition 2.01 - Memory Writes:

 

corsair4400c25-275x10-5.jpg

 

 

Everest Home Edition 2.01 - Memory Latency:

 

corsair4400c25-275x10-5b.jpg

 

 

==========

 

 

 

short description:

275x10 @ 2750Mhz, 1.325v + 126%

2.5-4-8-4 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...