Problems with G Skill Le 4400

[330-381-0034]

Here's the specs,

DFI Ultra D

AMD Venice 3200+ running @ 2700mhz Stable

2x256 sticks of Twinmos Samsung TCCD 4400LE

Fortron 550 PSU

X800 Pro Not OC'ed

Using the latest DFI Bois I believe 6-23-2

 

Im trying to run these at 275mhz 1:1. I have tried the fallowing timings.

2.5 3-7-3

2.5 4-7-3

2.5 5-7-5

 

I get blue screens. Any information on this would be greatly appreciated. Thanks in advance.

[babyelf]

try this.. see whether it helps..

 

and put your memory in the orange slots

 

try from 2.6v to 2.9v

 

Dram Frequency Set (MHz) : 200(DRAM/FSB:1/01)

Command Per Clock (CPC) : Enabled

CAS Latency Control (Tcl) : 2.5

RAS# to CAS# Delay (Trcd) : 04

Min RAS# active time (Tras) : 07

Row Precharge Time (Trp) : 03

Row Cycle Time (Trc) : 07

Row Refresh cyc time (Trfc) : 16

Row to Row delay (Trrd) : 03

Write Recovery Time (Twr) : 02

Write to Read delay (twtr) : 02

Read to Write delay (Trwt) : 02

Refresh Period (Tref) : 3120

Write CAS Latency (Twcl) : 01 Bus Clock

DRAM Bank Interleave : Enabled

 

DQS Skew Control : Decrease

DQS Skew Value : 128

DRAM Drive Strength : 3 / 5 / 7

DRAM Data Strength : 1

Max Async Latency : 07.0 / 08.0 Nano Seconds

DRAM Response Time : Normal

Read Preamble Time : 05.0 Nano Seconds

IdleCycle Limit : 16 Cycles / 128 / 256

Dynamic Counter : Disable

R/W Queue Bypass : 16x / 8x

Bypass Max : 07x / 4x

32 Byte Granularity : Disable (4 burst)

[330-381-0034]

Ok I got them in the orange ones. I am also at 2.8v if that matters.

[330-381-0034]

wont work still =(