Reapsy Posted September 14, 2005 Posted September 14, 2005 Hello, This system won't do anything except get into the bios. Installing windows is out, and if I try and run memtest86 from a CD it restarts the system straight away. I have updated the bios to 23 - 06 -05. I'm just trying to run in Single channel mode atm so I have 1 dimm in the orange slot furthest away from the cpu. I guess it is the memory causing problems, could someone running GeIL Utra X BH5 post there memory config so I can try it. Anyone have any suggestions as to what I can do? Thanks in advance. Reapsy. It turns out it just needed the vdimm set to 2.9V It's fine now in Dual Channel mode with 2-3-3-6 timings. Quote Share this post Link to post Share on other sites More sharing options...
RGone Posted September 14, 2005 Posted September 14, 2005 Man a simple search of the Overclocking Data Base brings these quick results for BH-5 memory and I know at one time AG had some of that stuff borrowed and ANY of his BH-5 timings listed are workable on just about ANY BH-5 since he setup his configuration for BH-5 on the misshipped UltraX that turned out to be BH-5... BH-5 Search the OCDB... RGone... :confused: :dog: Quote Share this post Link to post Share on other sites More sharing options...
Reapsy Posted September 14, 2005 Posted September 14, 2005 Thanks for the quick reply, didn't think about the overclocking section as I just want to run this board at stock. Funny how that appears to be so difficult. Well I changed some settings and now I can run memtest with one stick of ram only at 2-3-3-6 @2.8 vdimm. I guess I should try more juice next. I see all of the systems in the oc datrabase are at 3.4v and are 2x256mb only so it's kind of like apples to oranges. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.