Jump to content
Sign in to follow this  
ReXz0m

I could never run 1T Stable.

Recommended Posts

Try this,

 

GENIE BIOS Setting

>DRAM Configuration..................Press Enter = New Menu

FSB BUS Frequency....................200

DRAM Voltage Control.................2.80V

 

GENIE BIOS Setting >DRAM Configuration

DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01)

Command per clock (CPC)..............Enabled

Cas latency (tCL)....................2

RAS to CAS delay (tRCD)..............3

Min RAS active time (tRAS)...........6

Row precharge time (tRP).............3

Row cycle time (tRC).................11

Row refresh cycle time(tRFC).........14

Row to Row delay (tRRD)..............3

Write recovery time (tWR)............2

Write to read delay (tWTR)...........1

Read to write delay (tRWT)...........1

Refresh period (tREF)................AUTO

Write CAS latency (tWCL).............1

DRAM Bank Interleave.................Enabled

 

DQS Skew Control.....................Decrease Skew

DQS Skew Value.......................0

DRAM Drive Strength..................AUTO

DRAM Data Drive Strength.............AUTO

Max Async Latency....................6ns

Dram Response........................Normal

Read Preamble Time...................5ns

Idle Cycle Limit.....................AUTO

Dynamic Counter......................Disabled

R/W Queue Bypass.....................AUTO

Bypass Max...........................AUTO

32 Byte Granularity..................Disable (8 Bursts)

Share this post


Link to post
Share on other sites

:drool:

Try this,

 

GENIE BIOS Setting

>DRAM Configuration..................Press Enter = New Menu

FSB BUS Frequency....................200

DRAM Voltage Control.................2.80V

 

GENIE BIOS Setting >DRAM Configuration

DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01)

Command per clock (CPC)..............Enabled

Cas latency (tCL)....................2

RAS to CAS delay (tRCD)..............3

Min RAS active time (tRAS)...........6

Row precharge time (tRP).............3

Row cycle time (tRC).................11

Row refresh cycle time(tRFC).........14

Row to Row delay (tRRD)..............3

Write recovery time (tWR)............2

Write to read delay (tWTR)...........1

Read to write delay (tRWT)...........1

Refresh period (tREF)................AUTO

Write CAS latency (tWCL).............1

DRAM Bank Interleave.................Enabled

 

DQS Skew Control.....................Decrease Skew

DQS Skew Value.......................0

DRAM Drive Strength..................AUTO

DRAM Data Drive Strength.............AUTO

Max Async Latency....................6ns

Dram Response........................Normal

Read Preamble Time...................5ns

Idle Cycle Limit.....................AUTO

Dynamic Counter......................Disabled

R/W Queue Bypass.....................AUTO

Bypass Max...........................AUTO

32 Byte Granularity..................Disable (8 Bursts)

 

Tried... and got 89 errors @ Test #8.

And then hanged.

Share this post


Link to post
Share on other sites

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable (Try Disable - better compatabilty)

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 12 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 (Try Auto)

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - 7 (Important for me - change this value to ur own maybe get stable or try mine)

DRAM Data Drive Strength - Level 1

Max Async Latency - auto

DRAM Response Time - normal

Read Preamble Time - auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

 

ok here are my settings. they are at 3.1v with fsb at 240. remember leave ur ram at 200 and cpu at default and put ram to around 2.9v. try these. For me the data drive and drive strength determine wether mine is stable or not. so try different combinations. on the 3-10 bios i think i had it at 8 for drive and 1 for data drive

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×