Jump to content
Sign in to follow this  
Guest Tmod_merged

Tmod and loggan26's Bios Flash CD & Utility CDs NF/4/3/2+ATI

Recommended Posts

Guest Tmod
Will you be adding the latest Expert Official Bios anytime soon? just curious...

Where is it at? I have the latest that I see from the DFI site either Final or BETA.

 

The Expert x704bt bios works great but I noticed it boots with that stupid Full screen logo displayed. Any change of changing that? Used Memtest off the disk instead of the built inone in the bios. Does the Bios contain the v1.65+ or ther older v1.55+?

I can change the full screen logo no problem, I haven't checked anything on that bios so I don't know which version of the MemTest it has in it.

 

I will check and update it if need be shortly.

 

Happy New Year to you and yours CC.

 

Tmod

Share this post


Link to post
Share on other sites
Guest Tmod
Does the Bios contain the v1.65+ or ther older v1.55+?

It has the 1.65+

 

Tmod

Share this post


Link to post
Share on other sites
Guest Tmod

Ok I haven't received any help with the request I made for some images of the CMOS jumpers and battery clip on any of the motherboards that I requested.

 

Now I know with over 900 downloads of just my CD6.5 that there is bound to be someone out there that has a digital camera and a board that is listed on the CD.

 

I can't see anyone downloading the CD just for the hell of it.

 

So I guess this could be considered a bump and I am attaching images of my NF2 Ultra Infinity CMOS jumper and battery for examples of what I need as well as the quality that I will need for clarity.

 

Thanks

 

Tmod

 

NF2%20Ultra%20Infinity%20CMOS%20Jumper.jpg

 

Battery%20Clip.jpg

Share this post


Link to post
Share on other sites

hi tmod

would a photo of my dr board (which is already installed) be ok with everything attached?

its a real bugger to strip down.i can try and move things like the water hoses and some cables aside (somehow).

its a lot of hassle to disconnect everything but i can see what i can do

Share this post


Link to post
Share on other sites
Guest Tmod
would a photo of my dr board (which is already installed) be ok with everything attached?

Well we could try it, The images that I posted are with my board in the case and everything hooked up.

 

No harm in trying.

 

Thanks for the offer!

 

Tmod

Share this post


Link to post
Share on other sites

I'm at my parents house for the hols so comp isn't with me, sorry dude! However a thought, review sites often have high res images of the bare board, so you could just google image search or whatever and get the exact shot you want?

 

Suman

Share this post


Link to post
Share on other sites
Guest Tmod
However a thought, review sites often have high res images of the bare board, so you could just google image search or whatever and get the exact shot you want?

Thanks for the tip however I checked several sites including Anandtech and there is nothing that I can use.

 

For a general image of the board they are great but I need to get up close and personal with the battery and the CMOS jumper.

 

Tmod

Share this post


Link to post
Share on other sites

well i have your cd in use and its really great

i dont know if the MACRO of my sony will do the job...tomorrow i will give it a try

i have an sli-d laying around in a corner

happy new year

Share this post


Link to post
Share on other sites

Hi Tmod, super work on that Bios CD, appreciated!

Sorry it took me so long to read all 38 pages of this thread :) but now I know what I can do to repay you.

 

As soon as I get home from Russia with the wife (around 7th jan. 06) I will take a nice snapshot of my Expert and mail it to you.

 

I'd also appreciate it if you could quickly comment on these few items:

 

1. The 704 bios differs from the OCZ Tony's one in what way? Just that's Tony's's's' is optimized for OCZ memory? Anything else? Because I'll be opting for the Tony's version for my 2 Gig Platinum PC4000 but I haven't heard squat about it while the 704 bios is quite 'famous'.

 

2. Your CMOS clearing instruction says specifically to NOT remove the battery on Expert boards... you might've expected this question: why not? :P

 

3. Are all bioses modified from versions that support Dual Core completely? I'd hate to run my incoming 165 on one leg :D

 

Cheers

Share this post


Link to post
Share on other sites
Guest Tmod
1. The 704 bios differs from the OCZ Tony's one in what way? Just that's Tony's's's' is optimized for OCZ memory? Anything else? Because I'll be opting for the Tony's version for my 2 Gig Platinum PC4000 but I haven't heard squat about it while the 704 bios is quite 'famous'.

The 704 on my CD is from Tony, I have no idea what exactly he changed but I am sure it is on the same lines as the 704-2bta for the vanilla NF4's.

 

2. Your CMOS clearing instruction says specifically to NOT remove the battery on Expert boards... you might've expected this question: why not?

According to some that have tested this board after removal of the CMOS battery the startup voltage will increase and the chance of burning out the processor is increased. I believe even DFI says not to remove the battery on this board, This all may have changed with the latest bios release but I cannot confirm it.

 

Tmod

Share this post


Link to post
Share on other sites

Yikes! what a mistaka to maka!

 

I'll leave the battery alone :)

 

I trust leaving the Cmos jumper on clear for 10 minutes won't drain the battery?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...