Lanparty UT nF4 SLi-D .. Memory Issues?

[silixon]

Do you think updating the Nforce drivers would fix anything???

[babyelf]

if u're using 623-3 try in both orange or yellow slot.. see which one works.. and bump chipset voltage to 1.7 and LDT voltage to 1.3v

 

@ silixon.. running ornage slots for it to work is for bios before 316 (Before they enable dual channel on yellow slots) so yellow slots should still work

 

sorry to steal ur template Sharp hehe..

 

GENIE BIOS Setting

>DRAM Configuration..................Press Enter = New Menu

FSB BUS Frequency....................200

DRAM Voltage Control.................2.80V

 

GENIE BIOS Setting >DRAM Configuration

DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01)

Command per clock (CPC)..............Enabled

Cas latency (tCL)....................2

RAS to CAS delay (tRCD)..............2

Min RAS active time (tRAS)...........8

Row precharge time (tRP).............2

Row cycle time (tRC).................11

Row refresh cycle time(tRFC).........14

Row to Row delay (tRRD)..............2

Write recovery time (tWR)............2

Write to read delay (tWTR)...........2

Read to write delay (tRWT)...........2

Refresh period (tREF)................3120

Write CAS latency (tWCL).............1

DRAM Bank Interleave.................Enabled

 

DQS Skew Control.....................Decrease Skew

DQS Skew Value.......................0

DRAM Drive Strength..................AUTO

DRAM Data Drive Strength.............AUTO

Max Async Latency....................7ns

Dram Response........................Normal

Read Preamble Time...................5ns

Idle Cycle Limit.....................256

Dynamic Counter......................Disabled

R/W Queue Bypass.....................AUTO

Bypass Max...........................AUTO

32 Byte Granularity..................any value

[silixon]

Thanks guys for your help, nothing seems to work though . I've decided nothing is worth this hassle, I've been working trying to fix this crap for goin on 3 days now. I think I'm just going to go for another brand of Mb. Maybee once DFI has these bugs worked out I may consider it again.

 

this Mb doesnt look like the best thing to watercool anyway..(7800GTX gets in the way of the chipset fan and not to mention the heat will go through the roof if i put a different soundcard in a PCI slot)

 

But like I said, thanks and maybee I'll see you in the future.

[Frallan]

Also bump CPU special to 110%

[Sharp]

There should be a template for everyone to use