Jump to content

BIOS Checksum problem


Recommended Posts

Ok i set up my board no problem, even worked fine with my corsair memory, when i booted the pc this morning i had a bios checksum error press f1 to continue message but then it worked fine, later on i decided to run memtest which ran ok but now when i try to boot the system it either dosent post at all or i get a single long beep, anyone any clue what when wrong as it was woking fine before i used memtest.

Share this post


Link to post
Share on other sites

I have cleared the cmos and that didn't work but...i left it off for about half and hour turned it on and it works fine now a bit confused as no hardware was changed was almost like it just "decided" to start working again, hope this isnt going to be a constant intermitant problem as i cant afford do have my machine not working for extended periods of time randomly and ill have to switch boards :(

 

I havent experienced any crashing even when running demanding games so the system seems stable as a rock just sometimes it wont boot at all

Share this post


Link to post
Share on other sites

  • 2 weeks later...

It's gone again guys the board refuses to post again i get either 3 or 4 diagnostic led's randomly clearing the cmos does nothing, if i leave the board off for a long period of time it will boot give me a cmos error and ask for a system disk to be inserted into the floppy drive, i have tried re-flashing the bios form the floppy but recive a write-protected check lock jumper message, but i havent changed any jumpers one min it was working and then gone for no aparant reason, im at a loss as of what to do.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...