Jump to content

settings for dram in 3/10 bios


Recommended Posts

hello, im trying to set up my dram settings in genie bios according to a post by andyocz and in the second line theres a enable. in my bios i do not see an enable heres the settings as put in the post:

 

DFI NF4 (all), Venice, San Diego or Winchester 90nm and OCZ TCCD memory, 250mhz memory clock 1:1 with HTT speed.

 

Use the 310 Official BIOS or any -3 Beta BIOS variant for best results with Samsung TCCD/TCC5.

 

In DRAM Configuration Section of Genie BIOS:

 

200

enable

2.5

03

07 or 8

03

07 or 8

16 or 14

03 or 02

03

02 or 01

03 or 02

3120, 4708, 0648, or 2560 (4708 works well at high overclocks)

auto

enabled

auto

0

level 6, 5 or 7

level 2

7.0

auto

256

disable

16

07

disable

 

In Genie Bios:

 

250

4

16 16

10

100

disable

1.500v

1.300v (This is about 1.57v, if you need more or less adjust, but do not go past 1.45v here, use more the 123% below, there is a reason )

above VID * 123%

1.30v

1.70v

2.8v (2.7v-3.0v may work for you)

 

the second line is cas latency control on my bios. what am i missing here?

Share this post


Link to post
Share on other sites

  • 4 weeks later...

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...