Jump to content
Sign in to follow this  
newguy

Any update for PC4000 Gold OCZ5002048ELGE-K ?

Recommended Posts

Just got them today, the OCZ people said just came in today. According to the staff said this RAM are so hot in the market now, because of the BF2 require 1.3-1.4GB in order to run smooth. So lots of people start grabbing them. And he said this SamSung RAM unlike other Gold series which require high voltage. At most just feed them with 2.9V, don't pump up to 3.0V. They can do 270MHz no problem for sure. And now, I just wonder if anybody know that which BIOS best fit this RAM cause I need to flash mine by using these and what is the timing for these sticks?

 

Thank you. :P

Share this post


Link to post
Share on other sites

Hi,

 

I flushed to 704-2BT BIOS, memory in orange slots, doing memtest for optimal settings TEST#5 passed for 3 hours (I didn't continue, looks like it was doing good so) but after applied timing from other forum at most I can reach 255MHz get into windows but memtest, super pi not stable. Sometimes when boot up will show CMOS Checksum error :sad: . Reboots itself after 255MHz. Here's my setting

 

255

x3

16 16

11

101

disable

1.450v

auto

x113%

1.30V

1.70V

2.90V

Enable

 

200

enable

3

4

8

4

13

16

3

3

2

3

1032

auto

enable

auto

0

Level 8

Level 2

auto

normal

6

256

disable

16

07

disable

 

There is some strange thing happened after I flush to this BIOS, now the BIOS cannot save everytime, actually most of the time it won't save. but it should not acting like this, can I use other BIOS with this ram? :drool: Can anyone help me please?

 

Thanks!

Share this post


Link to post
Share on other sites

You reset your bios after you flashed? Remove power cord, remove battery, move jumper for about 30-an hour??

 

I went from 704-3 to 704-2bt when i got these sticks, i have tehm at 264mhz(264x10) they are memtest stable and have had puter on for 24 hours, playing games or encoding dvd's and she is rock stable.

 

Here are my settings, i acuatlly got these from Angry_Games sticky, tommorrwo i will test these vs my old settings to see if i find any difference..

Only thing you need to chnage is the cas setting..Put it to 3

 

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks(I think 10 is better for NF4)

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 19 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 04 Bus Clocks

Refresh Period (Tref) - 2560 Cycles

Write CAS Latency (Twcl) - 05 Bus Clocks

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

I think i fell in love with the picture of the girl in your signature.. :angel:

Share this post


Link to post
Share on other sites

in about 30-60 minutes I will be posting in the Overclocking database with this PC4000 2x1024 OCZ with my 4000+ @ 250x11 (2750Mhz)

 

its on the last hour of prime then its easy 3d benchmarks.

 

this is great memory, overclocks just as well on my 4400+ X2

Share this post


Link to post
Share on other sites

Speedyis300, thanks for your info, I got BIOS problem, I put the clear CMOS jumper on till tonite to see I can clear them first then will try the timing tonite.

 

Thanks for your comment, she is pretty eh? But no more, I have no idea where she are now? This morning show me this on my sig

sig adjusted for size

What to do???

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...