Jump to content

hellagood

Members
  • Content count

    82
  • Joined

  • Last visited

Everything posted by hellagood

  1. hellagood

    Fan Adapter

    Thanks for the info guys!!
  2. hellagood

    Fan Adapter

    Just got a thermalright si-97. I have a 120 mm fan I'd like to put on it. But, I can't seem to find any on the net. Just wondering where to find one or how to build one? Any info would be great. Thanx
  3. Just wanted to brag a little bit. Finally got this thing running stable @ 2.4 with stock vcore. Anybody know how high these things go?
  4. hellagood

    Opinions

    Anybody ever use MGE? If so are they any good?They have that 500 watt for 58 bucks @ newegg. So any info good or bad will be appreciated! Thanks, hella
  5. hellagood

    Opinions

    Just got the 450, this thing is awsome looking. Works pretty good so far and very quite. I will check the rails when I get my multimeter back from a friend, and let you know.
  6. hellagood

    Bad Luck!

    So, I've been building this comp since March right. I finally get the last ingredient, the Lanparty. I get it all put together, install win xp and do some benchmarks. It's benn running like 4 days straight, haven't turned it off at all. Thing is running awsome. I wanted to position the fans a little differently to get some better flow, right. So, I turn it off and do my stuff, turn it back on, nothing. Please insert boot disk???????????? what the heck. Take my side off, the raptor isn't moving at all. So, after months of anticipation, still can't get this fing thing off the ground. RMA!!!!!! I did get to oc some, my moblie was at 11.5 x 200, @ 1.5 vcore!! Not too bad. Score of 42,791 on aquamark 3. Well, I guess I can wait a few more fing weeks to get started again. Sorry, about the long post, just needed to vent a little!
  7. hellagood

    Bad Luck!

    I used just one power cable. I've switched all the cables, i've tried power, molex and sata seperatley of course, switched sata cables. Can't feel the thing spinning. I try and enter raid utility @ post, nothing detected.
  8. hellagood

    Kinda Ticked Off

    Crap happens. I am quite impressed with there tech support though. I called frank and left a msg. He got back to me in 20 minutes. 2 days later I had the chip, to bad it was the wrong one. Hopefully this will be just as painless. I just emailed Travis. Thanks for the info EX. Hey, it's been a coupe of days since I sent that email. How prompt is this guy Travis? Any other things I can try?
  9. My DFI died on me about 2 months ago right. So, I figure while i'm waiting for my bios chip to arrive I'll buy some new components. So, I bought a 36 gb raptor and a 9800 pro. Well, I finally get the time to put it all together. I go into bios and try to adjust some things. To my surprise I can't adjust the multi and I don't have any sata option. what the heck They sent my a bios chip for the DFI NFII 400-AL, I have the 400 ULTRA-AL. So, I'm back to the drawing board. I lost the number that I had for a MR. FRANK WONG, a DFI techie. He was great other than the fact they sent me the wrong chip If anybody has his # please let me know!! Thanks guys. Hopefully in a week or 2 I have a decent machine up and running. Can't wait to see what I got under the hood
  10. hellagood

    Kinda Ticked Off

    I tried to flash bios but it won't let me flash the 400 ultra al bios to this 400 al chip. I think I need a new chip!
  11. hellagood

    Sata Win98?

    Can you install a sata drive in win 98?
  12. hellagood

    Question

    Just like to know if nvidias GPUss work better with nforce boards than do ATIs? Or does it make any difference at all? Want to buy a new card!!! It's still a toss up between the 5900xt or the 9800 pro. I have an nforce board.
  13. hellagood

    Rebuilding

    Ya, mobo and proc are what's in my sig. The raptor is going to be for my OS. The 160 gb is for my storage. Thanks for the replys, keep'em coming! a rabbit how do you like the 9500 xt?
  14. hellagood

    Rebuilding

    I kinda rebuilding my comp. I just bought a Raptor 36.7 gb. Now I need to get a new vid card, I was thinking about the Chaintech 5900xt for 170 bucks. Also I need some memory, just a stick of 512 to start out with. They have Kingston Hyper X PC 4000 for 129 bucks @ Circut City. I that any good? Anyway let the opinions fly. Thanks in advance!
  15. hellagood

    Monitor Won't Come On!

    Alright maybe this is an easy fix. I turn my comp on and nothing happens on the screen, just blank. I've reset the cmos, change procs, gpus, memory, and reformatted my hard drive. Still, I get nothing, not even the bios screen!!!!!!! What the ffffffff The only thing I can think of is that my mobo is dead, DFI Infinity Ultra-AL. The lights on the board are still on though. The only major change I've made is the proc. I changed from a regular 2600 to a moblie 2600, and I reset cmos after the change was made. Anybody got any ideas? Thanks in advance! This is really bumming me out I didn't even get to oc my new mobile that much
  16. hellagood

    Monitor Won't Come On!

    No such luck on the monitor or psu. I'm gonna leave the batery out over night, see if that does the trick!
  17. hellagood

    Monitor Won't Come On!

    Thanx for all the help guys. I'll try the psu switch and the monitor switch tonight when I get home. I think she is dead though. I just bought it 2 months ago, guess I'll rma it. Maybe buy a Asus deluxe in the meantime. Again thanx for the replies!
  18. hellagood

    Monitor Won't Come On!

    I had already replace the proc with the old one. I check the speaker, it's right, still no beeps. I'm using the same monitor now that I use with the DFI. I tried holding the insert key in but nothing happans. One thing I did notice, no lights on my keyboard are lit up, like the num lock key! Anybody know what's up with that?
  19. hellagood

    Monitor Won't Come On!

    No beeps and everything is secure, all fans go. I've been messing with it for about two weeks now. Tried everything I can think of!
  20. hellagood

    2600+

    I have it at the norm 1.9 right now with a temp of 37 no load,56 load, vcore 1.55.
  21. hellagood

    2600+

    gETTING MY NEW PROC FRIDAY. i'M GOING MOBILE cAN'T WAIT TO SEE WHAT IT'LL DO! i'VE GOT A VOLCANO 10, DO YA THINK THAT'LL HOLD ME BACK?
  22. hellagood

    2600+

    Cool thanks for the info guys. One more thing what's the original vcore for this chip? 1.45 or 1.55? My board set it at 1.55!
  23. Here's what she says: AMD Athlon AX1500DMT3C AGOGA 0209MPM 41F34660272 aNY HELP IS APPRECIATED!
  24. hellagood

    Need To Identify Proc

    aNYBODY EVER OC THESE, ANY GOOD?
  25. hellagood

    Barton 2500+ To 3200+ Please Help !

    What about his vid card? 9000 Pro?
×