Jump to content

4th3truth

Members
  • Content count

    51
  • Joined

  • Last visited

About 4th3truth

  • Rank
    Member
  1. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    P8717 have not got over a 9000 score currently have gpu 1.2v/1.618v mem, 1100MHz/1575Mhz(6300), Afterburner is maxed as far as frequency spectrum goes I have seen 1250/7600 on the web. I believe that a water-block and radiators would be needed to run that all the time without wearing out the fan on the heat-sink. The side fan I have configured through speed fan to turn on and ramp up after 50C GPU temp. The GPU fan will not turn on until 50C. I figured this would save the lifespan of both fans as well as reduce noise, and dust intake. Haven't got around to getting a correct filter for the side intake. My homemade one was full of fail. Any suggestions?
  2. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Hello everyone again I have completed my build and now have it running stable at 4430MHz for the I7-3820 44x multi, Bus base 103, Volts 1.4, usually under 40C. 1600MHZ OC with the 103 bus , so not even 100Mhz difference to 1700mhz, I have 9-9-9 timings still but intend to back off when I hit a 10 then I will feel optimized with the CPU. I have the non-OC edition Sapphire 7950 @ 1.1V/1.62V 1044MHz/1575MHz(300GB/s) <--limit of Afterburner, I just played BF3 in Ultra minus 2xMSAA for 3 hours straight with a lowest fps rarely being in the 50s. MSAAx4 doesn't look too much difference I and I would rather I have the FPS not dipping in the upper 30's on rare occasions. In inner areas the FPS was so high that screen tearing started to drive me crazy so I turned on v-sync. Now it will stay between 55-90 fps with Vsync, Ultra, -2xmsaa. 3D on Ultra msaa4x goes into the 20s and is not playable. And the convergence in Bf3 is not so swell. I can't play to win in 3d its good on certain games though. Windows index score 7.8 due to 5.6GHz speed needed for at least 1 core. All 7.9. Ths SSD optimization took it from 7.7 to 7.9. herelink be back soon Video, Screen shot coming.
  3. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Getting my CPU finally and in other NEWS, sure glad I didn't wait for IB it would have taken forever. IB-E will probably be delayed as well as the future tick-tocks IMO get harder and Moors Law breaks down but this is due to economical reasons. On the flip side if WWIII breaks out I believe we will see the photon quantum computers emerge with pure manufactured diamonds with laser etched impurities to make cavities for making switches for photons to flow 3 ways like transistor/MOSFET but I don't know how they instead of using electric current direct 1 laser and make it go either 2 ways 1 or a 0. Gravatrons, from lasers photons energizing the quarks surfaces to emit gravity to warp the laser 1 of 2 ways would be sweet to see. Look up "phonon resonance" this tech I beleive is used in UFO tech, and the ability to conjurer anything out of anything example brick>cheeseburger
  4. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Getting CPU finally on Tuesday. Built a foam shroud mounted to that top of the side fan that seals air from going out of the side between the heat-sink and edge of video card. This is going to focus the top arc of the fans air flow to be more directed at the GPU fan intake. Also I am going to be looking at my local hardware store for a wire mesh to catch dust to completely fit the side inflow. Pictures and diagrams are coming. Extreme overclocked 7950 can almost best a 6990 at this Korean site. They were of using a Gigabyte triple fan version not the single fan reference design I purchased. The only difference is the heat-sink/ fan design. I am hoping to use the 1.1V core and 1.7V memory 1110/7600 setting at stable temps and use it to game. Over 9000! for 3DMark11 would be nice to see. I don't think I would try risking to push it harder then that.
  5. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    3820 5GHz OC 3820 is best gaming processor $10 cheaper then the 2600k currently on newegg. 3820 beat 3930k in gaming performance see link above. "In the Gaming 1 suite the 3930K consumed 24 percent more power, but with 6 percent less performance." With it being rumored that Xbox720 will have a Trinity APU in duel graphics with a 6670 most games being console ports will be written on 4 threads. 8 threads with hyper threading can handle fraps and skype/vent at the same time no problem during the next generation of games.
  6. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Bought a 130CFM fan to blow straight at the GPU fan from the side. Only when benching will I run it at 3000 RPM , normally will run 1800-2200 as it is a lot quieter. My goal is to get more air going into the case as their was only one front fan sucking air in vs 4 total fans blowing out including the GPU. Hope I can get to those 1300/7000Mhz speeds lol. I am kinda scared of overvolting though. Now I just got to get a dust filter for this thing , or pantyhose. Who has an opinion on what should I use? Does hardware stores have fine metal mesh filters that will catch dust effectively. I need a 200x300mm filter for the side of the case in which most air will be flowing in.
  7. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    I agree but the used higher end IBe will be lower costing after a few years of them being out. It is going to be 3 more weeks or so before I get the CPU. Benchmarks, pics, and a video or 2 should be on the way as well. AMD is not going to make CPUs just APUs and GPUs. x58 came out 2008 and the 990x still beats the i7-3820 and is similar even with the 6 core 3930K. 4 years have gone by and basically the 990x @$1000 is almost as good as a 3930k @$600. So for a little more then half the price with similar performance but 4 years late. Unreal 4 engine uses 2.5TFlops which is under the 2.9TFlops of a 7950. So many next gen games for the next eight years of console ports will use this engine. Therefor I believe that a 2500k and up are good to go as far as gaming for the next 8 years because the PCIe 3.0 doesn't limit the 2.5TFlops of performance. I have to put up with this old 2MB 775 for a few more weeks.
  8. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    A whole months wait for that i7-3820. The motherboard is already in the case with 1 stick of RAM for testing. Bluray and SSD were put in but not hooked up. I may test the mobo with my 4770 I have that overheats because the fan is worn out. Just so I don't ruin this $450 GPU if the other components violently fail at 1st power on.
  9. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    This screens 2D looks so good that my GF says that it almost seems 3D in certain games like Spore as it is in TriDef mode using duel DVI from 5750. When I get displayport hooked up I expect the extra millions of colors will even make the 2D and 3D better looking.
  10. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    THe Powerstream LIR2025 batteries are not staying on longer then 10secs or so they have 3.6V and the regular CR2025 says 3V. LIR2025 has40mAh vs the non-rechargeable CR2025's 100+mAhs. The CR2025 seems a bit thicker as well. I thought it was a possibility that the sync was going out due to the batter connection being more loosely fit. But I hope that these batteries were not a waste =(. Nvidia at least includes rechargeable 3d glasses out of the box. Supposedly the CR2025s get 50hrs of 3D before drained. I was hoping that these LIR2025s would last about 10hrs per charge due to the lower mAhs.
  11. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Of course, I agree. But my old Pentium D duel core with 2MB of cache has played almost every game on may with video card updates. 2006-2012 is eight years this processor has been able to play almost every game on med-ultra graphics. BF3 was the first game that did not run at a sufficient frame rate. Shogun 2 was playable though and has higher system minimum Ram requirements! I plan this time around to upgrade when DDR4 peaks sales so I get high end 2400MHZ 64GB and IVY-BRIDGE EXTREME 8 CORE or better around 2015-2017. DDR4 will not be much faster and may not be quad channel with the first adaptations. The Syncmaster native 3D is like nothing I have experienced before. The 2D-3D up-convert is kinda bad compared to real 3D signals. The darkness of 3D makes contrast less so is not recommended for MLG type play styles.
  12. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    I am glad it annoys you what would you rather prefer. Received SSD, batts.+charger, Monitor, and case today only 2 days after ordering with free shipping, 4-9 days was expected but Amazon and others are quicker then I anticipated. So far I only had about 5mins to play with this monitor haven't checked for dead pixels yet or anything. I will update later today on what I think about the visual performance and if I get a headache with its post 2d to 3d up-conversion.
  13. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    All the parts are paid and being shipped minus the headset because it is not out still... Changed mouse pad to the HD4 SteelSeries, $18 , is plastic with low friction and high precision. Within a month I will have benchmark screen shots and Youtube videos posted.
  14. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    New information update, CHALLENGER-U3 , USB 3.0 Front ports , $50, MAX PCI-E LENGTH IS ~11.4" (inches) or ~29 centimeters. I think that even that Gigabyte card with 3x120mm fans can fit in it. My GF keeps switching this old hp mouse optical out because the left mouse button on my Lazer is crap worn out POS China garbage. And my old Microsoft intellipoint has slightly the same issue but not as bad. $ 46 Razer Deathadder Infrared Gaming Mouse (RZ01-00151400-R3) Has 1ms response, good dpi, quality build. Only missing sniping button that Corsair m60 has or Ratz7. Probably just make things more confusing anyways anyone have DPI instant lowering button or can it be programmed into the deathadder? Keyboard RZ03-00260100-R3U1 Razer Arctosa Gaming Keyboard- Silver $40, Basically look up Lycosa without back-lighting, has the anti-ghosting around WSAD give about a 7 button anti ghosting. Has 1ms response, has macro capabillity, media buttons. $9 SteelSeries QcK Mini Mouse Pad, 63005, wrist pad built in and smaller form factor I usually play with a high mouse sensitivity.
  15. 4th3truth

    P10000 3D MARK11, OCed Budget X-79 $1500 build

    Probably going to drop down to the 760W PSU as the7950 Guru review states it max uses 300W with 3820 using 333 watts at OC speeds so 600 watts should be fine below the 88% of 760W. This shaves $30 off the price.
×