Jump to content

SpeedCrazy

Folding Member
  • Content Count

    3,701
  • Joined

  • Last visited

  • Days Won

    19

Posts posted by SpeedCrazy


  1. Hi Guys

    This was my first foray into overclocking and it failed. I followed some instructions off of My link and these were my BIOS settings.

     

    Ai Overclock Tuner.....................[Manual]

    CPU Ratio Setting......................[21.0]

    Intel® SpeedStep Tech............[Disabled]

    Xtreme Phase Full Power Mode...........[Enabled]

    BCLK Frequency.........................[181]

    PCIE Frequency.........................[100]

    DRAM Frequency.........................[DDR3-1451MHz]

    UCLK Frequency.........................[2903MHz]

    QPI Link Data Rate.....................[Auto]

     

    CPU Voltage Control....................[Manual]

    CPU Voltage............................[1.18125]

    CPU PLL Voltage........................[1.80]

    QPI/DRAM Core Voltage..................[1.22500]

    IOH Voltage............................[1.14]

    IOH PCIE Voltage.......................[1.50]

    ICH Voltage............................[1.20]

    ICH PCIE Voltage.......................[1.50]

    DRAM Bus Voltage.......................[1.64]

    DRAM DATA REF Voltage on CHA...........[Auto]

    DRAM CTRL REF Voltage on CHA...........[Auto]

    DRAM DATA REF Voltage on CHB...........[Auto]

    DRAM CTRL REF Voltage on CHB...........[Auto]

    DRAM DATA REF Voltage on CHC...........[Auto]

    DRAM CTRL REF Voltage on CHC...........[Auto]

     

    Load-Line Calibration..................[Enabled]

    CPU Differential Amplitude.............[800mV]

    CPU Clock Skew.........................[Delay 300ps]

    CPU Spread Spectrum....................[Disabled]

    IOH Clock Skew.........................[Auto]

    PCIE Spread Spectrum...................[Disabled]

     

    C1E Support............................[Disabled]

    Hardware Prefetcher....................[Enabled]

    Adjacent Cache Line Prefetch...........[Enabled]

    Intel® Virtualization Tech...........[Disabled]

    CPU TM Function........................[Enabled]

    Execute Disable Bit....................[Enabled]

    Intel® HT Technology.................[Enabled]

    Active Processor Cores.................[All]

    A20M...................................[Disabled]

    Intel® SpeedStep Tech............[Disabled]

    Intel® C-STATE Tech..................[Disabled]

     

    What went wrong?

    Also since this fail my 3DMark06 scores have been down by 20 points(only worried because of the competition)

    is it related?

    Thanks


  2. Hi Guys

    I am currently trying to trouble shoot an older computer for a friend, here are the specs then the problems.

    Specs: Dell dimension 3000 no additions or add ins Running Windows XP Home Premium SP3

     

    Problems: Internet takes about 10mins per page but the ethernet driver is uptodate.

    It slows down and freezes up at small tasks.

     

    No personally i would advise a new computer put they would prefer not to do that so any suggestions.


  3. All voltages and everything are stock. As i have not yet learned to overclock.

     

     

    Using blend i got CPU=66C System 33C (both very steady)

     

    Can someone explain to me how, using a i7 930 2.88 GHz i got to 3.05 without playing with anything?


  4. Okay here are my temps

    Specs I7 930 w/ CM geminisII

    case closed

    case fans= 2x vantec 80mm tornado 1x apevia 120mm blue

    Idle: CPU= 33C average System=30C average

     

    Load: running Prime95 large FFTs 30mins

    CPU= 65C highest reached System=33C stable

     

    according to AI Suite (bundleled software w/ ASUS board) i am running 100% at 2.95 GHZ

    Slightly odd as i have not yet OCed the thing.

     

    How are these temps?


  5. Personally the best mouse i have used recently comfort wise is the old dell mouse that came with a dell dimension 3000. It aint pretty or got fancy features but it fits my hand great with the buttons right under my fingers and the scrollwheel comfortably situated. It is a ball-wheel, but hey it works.

     

    P.S. I dont game so it only takes office work.


  6. Okay here are my temps

    Specs I7 930 w/ CM geminisII

    case closed

    case fans= 2x vantec 80mm tornado 1x apevia 120mm blue

    Idle: CPU= 33C average System=30C average

     

    Load: running Prime95 large FFTs 30mins

    CPU= 65C highest reached System=33C stable

     

    according to AI Suite (bundleled software w/ ASUS board) i am running 100% at 2.95 GHZ

    Slightly odd as i have not yet OCed the thing.

     

    How are these temps?


  7. Depending on how strong the field is it might possible effect your harddrives.

    My link

    Also permenant destruction of sensitive drives is conducted with a technique called degaussing which is essentially taking a huge magnet and scrambling the drive. Now i am not saying you will taotly wipe those hdds with your speakers but it might corrupt some data.


  8. Hi i want to test my load temps and am wondering how i go about putting a continuous load on my computer for any length of time is there some software to use or do i have to play some really demanding game for hours on end. (i dont normally play games )

    :withstupid:


  9. Hi

    This is the situation; We have 2 imacs on a network through a Linksys WTR54G wireless router. One mac is hardwired to it the other connects by wireless they both can share files. Enter my new windows 7 build, it is hardwired and can get internet but i wont let me share files. It tells me that their are 2 PCs on the network 'my pc' and 'Software 5171 C7' which it cannot connect to.

    Help please i don't know anything about networking as a professional set up what we have already. :withstupid:


  10. Hi guys i am having trouble getting my drivers up to date i have downloaded

    all the current drivers from ASUS's website but driver detective continues

    to tell me that 23 are out dated. What am i doing wrong??????

    Thanks

×
×
  • Create New...