Jump to content

panjang110

Members
  • Content Count

    274
  • Joined

  • Last visited

Everything posted by panjang110

  1. hi everyone, it been a while since i've posted anything here i'm a total noob when it comes to networking so help me please a few weeks ago I noticed my internet speed is slower than normal but I didn't care much since i'm busy at work. so yesterday when I was configuring my router I noticed multiple unknown device in the ip pool. I've tried putting those unknown device to deny association in my mac address filtering and reboot my router but they still keep showing up(with the same mac address that i put on the deny list ). what bother me is my password is 64 hex character how the hell did they even break through that???? so today I've change my ssid name and password again with a new 64 hex character but after an hour or so the device is in again this is really frustrating.. I've disable WPS and use WPA2-psk with AES only, right now the only thing i can do is set the max ip count to 4 which is the total device i got at home so they cant get in... any advice to secure my wifi? i really don't want to set my ip count each time i add or remove a new device.
  2. "HX-360XC is an extra thick (54mm, 2.1in) copper core radiator with a fin density of 30 FPI (fins per inch)" the rad is suitable if you're going to couple it with some high speed 38mm fan, if you're going to use the corsair sp fans i suggest running it in push-pull config
  3. nice, but i think sfx psu will look odd in my tower case
  4. hei guys,my old enermax psu is dead and i'm looking for a replacement so i need some fresh input. i'm looking for a modular psu within 500-600 watt capacity and i already got some on my list but maybe you guys can convince me with something else 1. seasonic g-550 2. seasonic m12 ii evo 520 3. cooler master silent pro gold 550 4. antec hcg 620
  5. the phone is charged on a docking station so i won't be able to put it on any surface, i have tried a normal usb charger but the charging speed is quite slow. maybe this has something to do with docking station, the station is powered by a 12v 3amp brick which is way higher than our typical micro usb charger
  6. hi guy, i just got my self a new droid and when i charge the phone it gets really hot, do i need active cooling? i know battery doesn't last long if it's hot but is it normal for smartphones? i've been using my se satio since 2010 so i really don't know what to expect. the phone is imported fujitsu arrows a 301f , the reason i bought this phone because of the fast charging advertised on the web which is quite true but they forgot to tell me about the heat
  7. unlocking a phenom rarely cause instabilty it will either crash at boot screen if the extra core is not useable or it will work. i bought a lot of phenom x 2 back in the old days and most of them will unlock to quad but some just unlock to triple. i use it for computers in a cafe running 24/7 . about stabilty issue i got one chip that need to be locked down to triple after 3 years of usage ( maybe amd did lock the core for a good reason) since you say the speed of the phenom x2 speed is 3.0 then it's the multiplier locked version (545) i wouldn't even bother overclocking it since you need a really good board to acheive high overclock.
  8. better spend that $800 on a new system+gpu, 9800gt is around 5 years old so unless you want to play old games at 120hz it's better to upgrade your gpu first.
  9. out of the three you mentioned i'll pick the eizo if you got the cash and enough gpu power to fully utilize it... if you got $800 to spend you should also look at this http://www.newegg.com/Product/Product.aspx?Item=9SIA2RY1DK9756
  10. i really want to avoid using fan controller since my one and only odd bay is occupied by my hdd,ssd and water/ambient temp display but isn't the delta fan have enough static pressure already? i couldn't find any datasheet on delta website but the nearest spec i can find is from sidewinder for EFB1212VH( VH is one step higher from HH designation) Specifications: 120x120x25mm, 102.06 CFM @ 3300 RPM, 45.5 dBA, 4.80 watts, 0.40 amps, Maximum Air Pressure 6.94 mm H
  11. last week i replace my delta fan(EFB1212HH 3000RPM) with CM jetflo120 so i can set custom fan profile with speedfan cause my wife is annoyed with the delta fan sound. i figure that i will not get too much performance drop since i've been reading good reviews on the fan especially on rad but after a week of usage i'm totally not happy. sound vs performance compared to the delta is mediocre, i've been running my delta with 7v adapter and the sound is about the same as 80% pwm on the jetflo but i'm getting higher temp and my water temp raised almost 20c above ambient after a few loop of unigine. with the delta fan the max water temp barely break 15c above ambient. here is my loop sequence pump/res=>gpu block=>cpu block=>rad=>pump/res(water temp probe on the res) cpu 3570k gpu 7970 pump-ek dcp 4.0 gpu block-heatkiller 79x0 cpu block-xspc raystorm rad- black ice gt stealth 240 5/16ID tubing on 3/8 barb + 2x90 degree adapter now i know cpu+gpu on a 240 rad is asking too much but before changing the fan i have great temps, the cpu is oc'ed per core to 4.1 on single 4.0 on dual and 3.9 on triple and quad so i don't think this will create too much heat and the card is running stock voltage [email protected]/1500. after fooling around with speedfan setting i found out that 2 of my 3pin fan header allows vr control for non pwm fan (i should have downloaded speed fan first before buying the fan, silly me ) and now i can set custom fan profile for the delta fan. so right now what do you guys think i should do with the extra pair of fan? sell it off or mount it as pull?
  12. i don't own a 24' 144hz but i do own a 27' 120hz and at first i think 120-144hz monitor is overrated but after using it for months going back to 60hz gives me a headache but if i was given a choice between a 144hz screen and 21:9 i will definitely choose the latter cause i like the extra pixel without stressing the gpu too much. gaming is even better since your fov is wider. i really don't understand why everyone is hyped up over 4K hd when 21:9 is so much better for gaming and even for movies. EDIT* have you looked at LG 25UM65? it should give you better ppi count vs 29'
  13. I use the vice and hammer (with wood block), but it's not brute force. It's a gentle tap or two. So far I've delidded eight 3570K's, two 3770K's, and a 4670K with no failure rates. I use Coollaboratory Liquid Ultra for the die and IHS, and Noctua NH-1 for the TIM with the heatsink. does it have to be a wood block? can i use something else say a rubber block? i've been looking around for a guide but all of them use wood block... i couldn't find any wood block that is soft enough like pine( i live in the tropics, so soft wood is a rare comodity here ) maybe you can post a guide here for all of us with ivy/haswell chip
  14. it's your call i'm just giving some other choice since you say space is priority... but if 350d size is fine with you then go for it, i really like the 350d btw it's just that i'm used to small case ( SG09 before this N200) and 350d doesn't fit my size preference hehehe
  15. actually 350d is quite big for a micro atx case since it was optimised for watercooling , i was going to get it but after seeing it in person i decided to go with cooler master n200 which is much snaller and also good for watercooling( and cheap too ).... you should also look at silverstone tj08 it looks way better than 350d and the build quality is great, since your not going to watercool the system and space is a priority i don't see a point buying the 350d unless you're in to the looks.
  16. i'm with el on the micro atx board, it's much better overall if you not going to make the pc lan rig.... the only downside is if you get the prodigy-m you will be short on the amount of hard drive you can install. for cpu i found a better deal for you here you go http://www.newegg.com/Product/Product.aspx?Item=N82E16819116906 Xeon E3-1230V3 $249 i always recommend anyone who's going with non k i7 to get the Xeon E3, it's cheaper and still hyper threaded. just missing igpu which you will never use anyways.
  17. ok since i'm the one who suggest the sg08-lite to you i have to tell you that i forgot to mention that the the case doesn't come with the ap181 fan. you will have to buy your own or use 140mm fan with the included adapter. i'm really sorry i didn't notice that earlier
  18. that is a very hot chip maybe intel cheap you out on the thermal paste. mine never get past 70C with my cooler master v8 and now mid 50's with a custom loop ([email protected]) what i think reviewer should do is do multiple cpu testing on all platform so all of us with older cpu can get fresh data, the trend i'm seeing right is now almost all review is done with 1150 cpu. i can barely see testing done on am3 let alone fm2
  19. hi everyone, i'm not an expert on electronics so i really need your help on this one. i've been looking around for a way to control my non pwm fans or pump via pwm signal straight from motherboard pwm header. after googling around i found some schematics and ready to make some on my own. here is one from techpowerup forums http://www.techpowerup.com/forums/threads/so-you-want-pwm-control-of-your-new-cpu-fan.107135/ and another one from robotroom http://www.robotroom.com/PWM5.html now i'm a total noob when it comes to transistor, so is this plausible? both circuit is different but still using pwm signal as control. as i understand pwm speed control is done by turning the motor on and off at a very high speed(measured in hz) so lowering down the fan speed means the on and off cycle is done at a much lower hz right? i want to try the first schematic but split the fan header in two, one header with 12v and grnd goes directly to psu and the pwm and tach goes to the motherboard. i also found some pwm controller from ebay, is this a better solution?
  20. not really just itching to try out cf hehehe been playing games in stereo 3d these days maybe i need some extra fps.... you should try thief in 3d, it's awesome
  21. probably just a bug, cause i remember using older version of gpuz to get the asic reading with the stock blower. too bad, i tought you keep the 7950 i really want to know if it's really worth the money to get another 7950 or 7870XT. actually all amd card that is using the same chip for their card can be crossfired in this case 7970(tahiti xt) with 7950(tahiti pro) or 7870XT (tahiti le) and even the newer rebranded R9 280X(tahiti xtl) R9 280(tahiti pro2). they have been doing this for a long time i couldn't remember when they started it.
  22. launch day gigabyte HD7970 reference 1. Stock Blower setting GIGABYTE---HD7970 REFERENCE---82.1%---925Mhz/1375Mhz~1050mV---1050Mhz/1500Mhz~1050mV 2. Modded Deepcool Dracula setting GIGABYTE---HD7970 REFERENCE---82.6%---925Mhz/1375Mhz~1050mV---1100Mhz/1500Mhz~1069mV the weird thing is by changing the cooler my score goes up 0.5% is that even possible?(maybe it's just gpuz glitch) one thing you should know this card doesn't like extra voltage, anything higher than 1080mV and both core and vrm temp goes up a lot. i wonder if all higher asic card suffer this problem or just my card. OFF TOPIC Ivi have you tried cf'ing the 7970 with your 7950? do they play nice together? i couldn't find any new review data regarding mixed card cf. with old review data mixing higher tier card with second tier card increases micro stuttering due to the second tier card rendering slower than the higher tier card, but with the new frame pacing driver i wonder if this problem has been dealt with. if it did i might get myself a 7950 or 7870XT for cf
  23. thanks man, but at 34 liter i don't think this case qualify as an sff case hehehe i think it sit somewhere between an sff case and a mini tower.....i don't really like the prodigy but it may suit you if you wanna do custom loop, the elite110 is just too compact to stuff anything... or try apogee drive with a rad that have a fill port/reservoir end, then you will have the benefit of an aio with the performance of a custom loop
×
×
  • Create New...