Jump to content

sjthergeat1

Members
  • Content Count

    14
  • Joined

  • Last visited

About sjthergeat1

  • Rank
    New Member
  1. I have an ebay account if thats what your talking about http://myworld.ebay.com/sjthegreat1
  2. Also added X2 4200+ for $60.Ill take $275 for all plus shipping.
  3. Hey guys i have a DFI LANParty Venus nF4 SLI-DR Venus 939 board .Comes with everything in the box,board number 719.Asking $150.
  4. Yeah i tried FSB 166 and upped the voltage to 1.55 but its not stable.
  5. Hi everyone i just wanted to update you thank you for your input.I currently am stable here ran prime95 also for 2 days.I cant get anything beyond this.I went to FSB 260 but its not stable.Any other suggestions would be appreciated. FSB Bus Frequency = 250MHz LDT/FSB Frequency Ration = X 4.0 LDT Bus Transfer Width = 16 16 CPU/FSB Frequency Ratio = X 10.0 PCI eXpress Frequency = 101Mhz K8 Cool'n'Quiet Support = Disable CPU VID StartUp Value = 1.45V CPU VID Control = 1.45V CPU VID Special Control = 102% LDT Bus Voltage = 1.20V Chip Set Voltage = 1.52V DRAM 2.5V Voltage = 2.71V DRAM Configuration Settings: DRAM Frequency Set.............................. - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enabled CAS Latency Control (Tcl)....................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras).................... - 08 Bus Clocks Row precharge time (Trp)........................ - 03 Bus Clocks Row Cycle time (Trc).............................. - 10 Bus Clocks Row refresh cyc time (Trfc)..................... - 16 Bus Clocks Row to Row delay (Trrd)......................... - 03 Bus Clocks Write recovery time (Twr)....................... - 03 Bus Clocks Write to Read delay (Twtr)...................... - 02 Bus Clocks Read to Write delay (Trwt)...................... - 03 Bus Clocks Refresh Period (Tref).............................. - 3120 Cycles Odd Divisor Correct................................ - Disabled DRAM Bank Interleave............................. - Enabled DQS Skew Control.................................. - Auto DQS Skew Value.................................... - 0 DRAM Drive Strength.............................. - Level 08 DRAM Data Drive Strength....................... - Level 2 Max Async Latency................................ - 8ns DRAM Response Time.............................. - Normal Read Preamble Time................................ - 6ns IdleCycle Limit....................................... - 256 Cycles Dynamic Counter.................................... - Enable R/W Queue Bypass................................. - 16 x Bypass Max........................................... - 07 x 32 Byte Granularity................................. - Disable(4 Bursts) Temps: CPU: (idle) 29°C (load) 35°C System: (idle) 39°C (load) 47°C GPU: (Idle) 42°C (load) 54°C My specs: DFI LANPARTY UT nF4 SLI-DR Venus AMD Athlon 64 X2 4200+ (250x10 @ 2.5Ghz, 1.45v) BFG 7800GTX [email protected] 485/1350MHz 2x 1GB OCZ Gold GXT PC4000 (3-3-3-8 1T) OCZ5002048ELGEGXT-K Zalman Reserator 1 Water Coolng 2x 74GB WD Raptor Raid-0 1x 200Gb Seagate 7200.1 SATA II Silverstone Case and Silverstone 600W PSU Samsung Lightscribe DVD+/-RW SH-S162L Llite-On SOHW-1633S
  6. i can boot with my vcore at 1.6V and ram at 2.8V it seems like something is wrong there
  7. well i tried dropping the ldt multi to 4x and its still wont go above 2.5ghz.I dont know what else to do.I am at 1:1 with 227 fsb.It goes up to 245 but i get error in prime and it will freeze after a while
  8. I just ran prime for 8hrs and it just shut off.I clocked it down to 2.5ghz and prime is running for a day now almost.Dont know whats limiting the oc i think its my ram.
  9. Hey Kitfit1 Thanx, that seemed to work but its not getting any higher than 2.6ghz.I got it to 2.7 but it was not stable.Anyone that can think of something else please help.
  10. Hey guys, I need help on overclocking my X2 4200+.I have it stable at 2.475ghz but cant get any higher.I know this chip can go higher dont know what to do.Please help I've been trying for 2wks now.My Goal is 2.8ghz.Thanx FSB Bus Frequency = 227 MHz LDT/FSB Frequency Ration = X 4.0 LDT Bus Transfer Width = 16 16 CPU/FSB Frequency Ratio = X 11.0 PCI eXpress Frequency = 101Mhz K8 Cool'n'Quiet Support = Disable CPU VID StartUp Value = Startup CPU VID Control = 1.35V CPU VID Special Control = 104% LDT Bus Voltage = 1.20V Chip Set Voltage = 1.51V DRAM 2.5V Voltage = 2.71V DRAM Configuration Settings: DRAM Frequency Set.............................. - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enabled CAS Latency Control (Tcl)....................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 04 Bus Clocks Min RAS# active time (Tras).................... - 08 Bus Clocks Row precharge time (Trp)........................ - 03 Bus Clocks Row Cycle time (Trc).............................. - 10 Bus Clocks Row refresh cyc time (Trfc)..................... - 14 Bus Clocks Row to Row delay (Trrd)......................... - 03 Bus Clocks Write recovery time (Twr)....................... - 03 Bus Clocks Write to Read delay (Twtr)...................... - 02 Bus Clocks Read to Write delay (Trwt)...................... - 03 Bus Clocks Refresh Period (Tref).............................. - 3120 Cycles Odd Divisor Correct................................ - Disabled DRAM Bank Interleave............................. - Enabled DQS Skew Control.................................. - Auto DQS Skew Value.................................... - 0 DRAM Drive Strength.............................. - Auto DRAM Data Drive Strength....................... - Auto Max Async Latency................................ - Auto DRAM Response Time.............................. - Normal Read Preamble Time................................ - Auto IdleCycle Limit....................................... - 128 Cycles Dynamic Counter.................................... - Enable R/W Queue Bypass................................. - 16 x Bypass Max........................................... - 05 x 32 Byte Granularity................................. - Disable(4 Bursts) Temps: CPU: (idle) 28°C (load) 34°C System: (idle) 48°C (load) 52°C GPU: (Idle) 47°C (load) 57°C My specs: DFI LANPARTY UT nF4 SLI-DR Venus AMD Athlon 64 X2 4200+ (245x11 @ 2.475Ghz, 1.4v) BFG 7800GTX [email protected] 500/1350MHz 2x 1GB OCZ Gold GXT PC4000 (3-4-3-8 1T) OCZ5002048ELGEGXT Zalman Reserator 1 Water Coolng 2x 74GB WD Raptor Raid-0 1x 200Gb Seagate 7200.1 SATA II Silverstone Case and Silverstone 600W PSU Samsung Lightscribe DVD+/-RW SH-S162L Llite-On SOHW-1633S
×
×
  • Create New...