Jump to content


  • Content Count

  • Joined

  • Last visited

About playdoh12

  • Rank
    New Member
  1. i already have tried that and it just wouldnt do anything
  2. Ok. I have a computer with a DFI Lanparty nf4 Sli motherboard, an AMD Athlon 64 3000, 2 sticks of 256mb ram, a 40gb IDE hard drive, IDE cd drive and an ATI X300 that i am trying to install windows XP on. I built this computer about a year ago and it ran fine. When i built it the first time i put in a 80gb Seagate sata hard drive. A couple months ago i took that hard drive out for use in another computer. Today i decided i wanted to use the computer and installed the 40gb IDE drive. Then i tryed to install XP. XP wont install. It boots, goes to the first part of the xp instillation and completes it like it normally does. Then it finished the first part and goes to the screen where it says rebooting in 15 seconds to complete next step. It reboots but goes back to the first step. It will do this step then repeat. It will not go to the next step. I am not sure what the problem is. I need help. thanks
  3. ok i think i might go with that psu, but i would still like to know what it means when only the one red led furthest left is lit, ive seen the chart thing but still dont know if just that one led lit is good or bad
  4. http://www.ultraproducts.com/product_detai...9&productID=369 will this do??? very low budget
  5. http://www.ultraproducts.com/product_detai...9&productID=369 would this psu do the job?? im 16 and have little $$$, but i can get this psu very cheap if it could handle the load
  6. http://cgi.ebay.com/Ultra-V-Series-500-Wat...1QQcmdZViewItem think this psu would do the job, im 16 and have little $$$
  7. Hello, this is my first build. I assembled the system but when i turn on the computer i get one beep and a blue screen no bios or nothing. The diagnostic led furthest to the left is the only one that is on, what does this mean. I dont know why it wont boot. Any ideas??? The parts are as follows. DFI Lanparty nf4 sli socket 939 motherboard AMD Athlon 64 3000+ 1.8ghz Antec Smartpower 2.0 350w Cooler Master Cavalier case 256mb Kingston pc3200 ram installed in slot 2 An old PCI VGA card used until i know the pc works An old CD drive at 24x and an old floppy drive there is currently no windows as i havent been able to boot that far. would really appreciate some help.
  • Create New...