Jump to content

Final8ty

Members
  • Content count

    51
  • Joined

  • Last visited

Everything posted by Final8ty

  1. Just got my Enermax Infiniti 720W to upgrade from my Liberty 620W as im going to be pulling more watt soon Lets hope i got a good one of these as well and it does not screw with the dfi.
  2. Installed Vista Ultimate64 last Thursday and have had no disk errors in event viewer yet and that's with the raid uli drivers that are in vista alreadyand no freezing of any kind.
  3. I had no problems installing Vista Ultimate 64. No motherboard drivers were needed it found my raid setup no problem & lan ports Oh & i have no m1575 disks errors so far with vista 64 none with the drivers in vista
  4. Final8ty

    CPU upgrade advise.

    Love my Opty 185 :angel:
  5. Final8ty

    Way to check my Opty 165 stepping?

    Must be a typo. 1.55 vcore for 3Ghz in sig so i doubt that 3350 is on the cards. More like 303Ghz
  6. Get an ImageShack account That pic was to small
  7. Efficiency drops the hotter the chip gets, so you ether up the volts to make up for it at a given speed or find a away to get rid of more of the heat. At low speed you can get away with higher temps & still be stable because chip does not need to be as Efficient so can afford to waste some as heat. I was doing a high Mhz Orthos run at low Vcore & failed with in 30min temps only peaked at 48c, i got the desk 12" fan out & aimed it at cooling towers & got peak temps down to 42 & passed Orthos at same settings.
  8. Final8ty

    The AMD 3GHz Club

    Nice OC but once you get your overclocking sorted its clear from that pic what you need to sort out next if you have a window on that case
  9. When i changed from a 4800+ to my Opty 185 i had to clear the CMOS thats all with just a push of the reset & poweroff buttons but i don't know if your mobo has that feature so you may has to do it the harder way.
  10. Final8ty

    AMD Operton 185 CCBBE 0615

    The Muilti is the only reason why bought it over a cheaper version. Actually i ordered a fx60 so that i could run my mem tight as could be but was to late & had to change my order
  11. Final8ty

    AMD Operton 185 CCBBE 0615

    I can only hope when i finish this water cooling setup that it will be, as we all know that some chips have a real solid overclock wall but even if it don't clock much more im happy as hell all the same.
  12. Final8ty

    AMD Operton 185 CCBBE 0615

    I can only hope when i finish this water cooling setup that it will be, as we all know that some chips have a real solid overclock wall.
  13. Final8ty

    AMD Operton 185 CCBBE 0615

    Grab it! I'm sure mine is CCBBE 0613RPMW & 9 hours dual Orthos stable so fare at 3003Mhz 1.280 vCore.
  14. Final8ty

    Opteron Prices jump!!

    I agree! People who have a 939 system who don't have a dualcore cpu should get one now while they can & clock stable as much as they can until AM3 gets here as im not moving until that at the earliest. The Optys are still priced ok here in the UK, infact the price has dropped. Got my Opty185 yesterday for £207 when just a month before from the same place it was £270. And as you can see from my sig its a cracker.
  15. From what you have posted & what is in your sig getting stable is not the problem. Your having problems getting stable overclocks.
  16. Those setting was for overclocking but it seemed to have a side effect of stopping the disk freeze. I spent good part of half a day trying to find the best combo for my cpu by overclocking to 2.8 at low volts which i know will fail prime but when messing with them settings i went from under 5 mins stable to 20 mins to 50mins at same vcore but the core that failed would change depending on the settings. Now the bad news i was at 2.952Ghz not prime stable for the 4 days but just just now i dropped down to 2.855Ghz prime stable but now the errors are back. So i will be going back to 2.952Ghz to see if it stops the errors again until my Opty gets here.
  17. What Revision is you mobo? Sticker on side of pcie slot.
  18. I may post a compleat list of my rom settings if no errors hold up.
  19. I also have HD S.M.A.R.T ENABLED in rom but i doubt that will help.
  20. used to get the errors about twice a day but now have had none for 4 days. I have been messing with the bios, set my HT Bus NMOS Drive Strength, HT Bus PMOS Drive strength to 12 & HTBus Reciever Impedance to 0
  21. I used to get the errors about twice a day but now have had none for 4 days. I have been messing with the bios, set my HT Bus NMOS Drive Strength, HT Bus PMOS Drive strength to 12 & HTBus Reciever Impedance to 0
  22. Final8ty

    4x256 1T

    wil Seeing your Sig gives me a slight unsettling feeling again:)
×