Jump to content

Boosssssted

Members
  • Content Count

    61
  • Joined

  • Last visited

About Boosssssted

  • Rank
    Member
  1. what is better 2x512 or 2x1024? and which is better to oc? is on this site something for me to buy? http://www.sallandautomatisering.nl/
  2. which memory is supported on a dfi lanparty ut nf4 ultra-d? (ddr) (ddr2) (3200) (4000) whichone can i buy? THX
  3. What are the max temps for the cores? read with core temp beta 0.94
  4. I have tested this last night and he passed te prime test for 10 hours Can I set now the fsb to 270 and maybe put the cpu vid control to 1.450v? how high can i go with the cpu volt? with this setting it was full load (with prime) 41c FSB Bus Frequency........................... - 260 LDT/FSB Frequency Ratio....................- 4.0x CPU/FSB Frequency Ratio................... - 10.0x CPU VID Control.................................- 1.425V CPU VID Special Control.......................- Above VID * 110% LDT Voltage Control............................- 1.30v Chip Set Voltage Control......................- 1.60v DRAM Voltage Control..........................- 2.80v DRAM Frequency Set...........................- 140=RAM/FSB:07/10 CAS Latency Control (Tcl).....................- 2.0 RAS# to CAS# delay (Trcd)...................- 03 Bus Clocks Min RAS# active time (Tras)..................- 06 Bus Clocks Row precharge time (Trp)......................- 03Bus Clocks I will try tonight this settings: to get 2700mhz FSB Bus Frequency........................... - 300 LDT/FSB Frequency Ratio....................- 3.0x CPU/FSB Frequency Ratio................... - 9.0x CPU VID Control.................................- 1.450V or 1.475v CPU VID Special Control.......................- Above VID * 110% LDT Voltage Control............................- 1.30v Chip Set Voltage Control......................- 1.60v DRAM Voltage Control..........................- 2.80v DRAM Frequency Set...........................- 140=RAM/FSB:07/10 CAS Latency Control (Tcl).....................- 2.0 RAS# to CAS# delay (Trcd)...................- 03 Bus Clocks Min RAS# active time (Tras)..................- 06 Bus Clocks Row precharge time (Trp)......................- 03Bus Clocks
  5. with your setup @166 divider he won't bootup
  6. I tryed DRAM Drive Strength..............................- Auto DRAM Data Drive Strength.......................- Auto timings 3-5-5-10 and with 166mhz he wont boot so set it back to 140mhz he boot but still can't pass the first round of superpi
  7. Stock settings for my ram 3.0-3-8-3 @ 200mhz I don't know how far i can overclock it. I have just set : FSB Bus Frequency........................... - 270 LDT/FSB Frequency Ratio....................- 3.0x CPU/FSB Frequency Ratio................... - 10.0x DRAM Frequency Set...........................- 140=RAM/FSB:07/10 CAS Latency Control (Tcl).....................- 3.0 RAS# to CAS# delay (Trcd)...................- 03 Bus Clocks Min RAS# active time (Tras)..................- 08 Bus Clocks Row precharge time (Trp)......................- 03Bus Clocks but he still can't pass the first round of superpi if i set my dram freq. high he won't even bootup and the memb runs @ 192.9MHz so what do i wrong?
  8. my cpu is not the problem i can run it on 2700MHz @ my voltage but then my memory has a problem he can't pass the first round of the 32m superpi test
  9. Hi I can't passed my 2550MHz if i go to 2600MHz he fails with prime after 30 min and the memb test after the first round This are my current settings stable for more the 12 hours prime and with 3DMark06 3515marks (is that good?) my temps are: pwmic idle 39c full load 43c cpu idle 24c full load 33c chipset idle 32 full load 40c gpu idle idle 36 full load 48c FSB Bus Frequency........................... - 255 LDT/FSB Frequency Ratio....................- 4.0x CPU/FSB Frequency Ratio................... - 10.0x PCI eXpress Frequency.......................- 112Mhz CPU VID StartUp Value........................- Startup CPU VID Control.................................- 1.350V CPU VID Special Control.......................- Above VID * 110% LDT Voltage Control............................- 1.20v Chip Set Voltage Control......................- 1.50v DRAM Voltage Control..........................- 2.80v DRAM Frequency Set...........................- 140=RAM/FSB:07/10 Command Per Clock (CPC).....................- Auto CAS Latency Control (Tcl).....................- 2.5 RAS# to CAS# delay (Trcd)...................- 03 Bus Clocks Min RAS# active time (Tras)..................- 04 Bus Clocks Row precharge time (Trp)......................- 02 Bus Clocks Row Cycle time (Trc)............................- Auto Row refresh cyc time (Trfc)...................- Auto Row to Row delay (Trrd)........................- 02 Bus Clocks Write recovery time (Twr)......................- 02 Bus Clocks Write to Read delay (Twtr).....................- 02 Bus Clocks Read to Write delay (Trwt).....................- 03 Bus Clocks Refresh Period (Tref).............................- 3120 Cycles DRAM Bank Interleave............................- Enabled DQS Skew Control.................................- Auto DQS Skew Value...................................- 0 DRAM Drive Strength..............................- Auto DRAM Data Drive Strength.......................- Auto Max Async Latency................................- Auto DRAM Response Time..............................- Fast Read Preamble Time................................- Auto IdleCycle Limit.......................................- 256 Cycles Dynamic Counter....................................- Disable R/W Queue Bypass.................................- 16 x Bypass Max...........................................- 07 x 32 Byte Granularity.................................- Disable(4 Bursts)
  10. What is a good memory for my mobo? dfi lanparty ut nf4 ultra-d I think my memory is not good for overclocking my cpu higher the 2550 if i go higher (2600) then he will not pass the prime test if changed the timings but can get it stable I have now : FSB Bus Frequency - 255 LDT/FSB Frequency Ratio - 4.0 CPU/FSB Frequency Ratio - 10.0 PCI eXpress Frequency - 102Mhz CPU VID StartUp Value - Startup CPU VID Control - 1.350v CPU VID Special Control - Above VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.80v DRAM Frequency Set - 140=RAM/FSB 2.5-3-7-3 this i tested for more then 10 hours no probs @ all is my memory not good enough or is it my settings?
  11. I set in the bios PCI eXpress Frequency - 102Mhz and now is he 609/1694 it's good now
  12. when i yesterday gameded with the oc setting a had no problems. how do i flash the bios? but volt modding howmust volt will it get with it? will it harm to do the volt mod?
  13. I had yesterday oc my 7600gt xxx @ 609/1690 (stock @ 590/1600) I gamed without no probleme @ all I started my pc today and the setting on coolbits are now stock again and i can't oc anymore? what's the probleme here?
  14. is ther no usb drivers that i can download? some new ones? can't find good ones on the net (goolge)
  15. must download the new drivers then it will be 590/1600 my probleme is solved now so far and with the fps thing if have changed some settings in the nvidia profile now my fps is back
×
×
  • Create New...